Hisense TV Repair: Common Faults and Solutions.
Search: Hisense
Results: 29
Results: 29
Hisense Repair Guide: Common Issues and Fixes
Brand | Model | Fault | Detailed Problem | Solution | By |
---|---|---|---|---|---|
HISENSE | LCD4204EU | After an explosion it became inoperative | Check replace strx6769, re038(10ω), re032(150ω) | Mário Martins | |
HISENSE | TLM40V68P V400H1-C01 | White image | Check cp19 and dp5 | Mário Martins | |
HISENSE | TLM3201 | Sound and other functions working correctly but no image | D304 (bav99lt1) na t-con | Mário Martins | |
HISENSE | TLM3226 | No image, audio ok | Verify replace u3 (cm2681a-kq) na t-con | Matias ERP | |
HISENSE | TLM4788P | Doesn't connect at all. power supply has voltage at the primary. voltage-free secondary. | Re523 open | Matias ERP | |
HISENSE | H49N5700 HLL-4455 | It turns off after some time remaining in stand-by, the higher the brightness the faster it fails. | Resistances r810, r811 and r812 of (3m9) changed. replace with higher power resistor | Pablo | |
HISENSE | LTDN48K20DAM | TV turning off after a few seconds | 3.3v regulator with low output voltage | Replace the 3.3v regulator that has a voltage below or above. se8117t33 put ams1117 3.3 in place. | Samuel Silva |
HISENSE | LSDN32W67EU | Stand-by only. inverter problem. | Inverter model: 715g3645-p01-w30-003s motherboard model:tqacb 2b01802 psu model: 715g3332 | Replace c149 (470µf). check pictures in lsdn32w67eu | Kaya Elektronik09 |
HISENSE | LCD4204EU | Stopped working after an explosive noise inside (bangggg!!!) | Strx6769 burst and when it burst it produced the noise that was heard | Replace strx6769, resistor re038(10r) and re032(150r), check the circuit together for any other damaged components | Matias |