Search: LG
Results: 4833

LG Repair Guide: Common Issues and Fixes

Brand Model Fault Detailed Problem Solution By
LGLN5400
Doesn't startPower supplyIc101 (ssc1s311a), r107 (22Ω), r108 (100Ω), q101 (mdf11n65b), c102 (330pf 1kv), f100 (t5a h 250v) - em curto/abertosCarlos Modesto
LGLN5400
Doesn't startPower supplyIc101 (ssc1s311a)Carlos Modesto
LG42LD460
Does not turn on or standbyC-457 and c460 shorted, leading to c-405, 459 and which are in parallel with the same symptom, also killing the 3.5v power supply.Replace of c-457 and c-460.EVALDO DE OLIVEIRA
LG55LA6210
Stand bay flashing and won't turn onC 2430 shorted is close to the connector that comes from the power supplyRoberto
LG RAD225B
The device turned on but after a while it turned off, with the functions locked.Missing panel buttons, replace all buttons with new buttons.
LGRAD 225B
The device turned on but after a while it turned off, with the functions locked.Missing panel buttons, replace all buttons with new buttons.
LG21FJ8RL
CW81B
Dark image giving the impression of a weak tube but if you set the screen to maximum the image looks goodThis LG chassis and some other 14, 20 and 21 inch chassis have a habit of corroding the kinescope board, tsound's no point trying to recover it because if it doesn't returnThe solution is to replace the kinescope board, you can put the kinescope board from any 20 and 21 inch LG TV. If the kinescope board has showing signs of corrosion, replace to avoid future returnsEl Cuajinais Vintage
LG21FU6TL
CW81B
Dark image giving the impression of a weak tube but if you set the screen to maximum the image looks goodThis LG chassis and some other 14, 20 and 21 inch chassis have a habit of corroding the kinescope board, tsound's no point trying to recover it because if it doesn't returnThe solution is to replace the kinescope board, you can put the kinescope board from any 20 and 21 inch LG TV. If the kinescope board has showing signs of corrosion, replace to avoid future returnsEl Cuajinais Vintage
LG21FU6TL
CW81B
Dark image giving the impression of a weak tube but if you set the screen to maximum the image looks goodThis LG chassis and some other 14, 20 and 21 inch chassis have a habit of corroding the kinescope board, tsound's no point trying to recover it because if it doesn't returnThe solution is to replace the kinescope board, you can put the kinescope board from any 20 and 21 inch LG TV. If the board has 9 or 12 it will work fine, this 12 or 9 V is in the harness that comes from the main board, this harness is what receives the RGB signal from the micro,El Cuajinais Vintage
LG 42PW350
Image all grainyResistor on the board ysus r424 or 426,470 man next to the transistor q706 under the board
LG50PT250
Turn on the image appears and disappears only the soundRemove the 2-man and 10-man resistors, sand the terminals and resolderCabeça
LG42PG20R
Turns on for a few minutes, loses sound and turns offChange the capacitors on the main board. c879,875 of 10mf/10v and capacitors 1110,1118,1128 of 100mf/16vFlavio
LG32LM627
Control doesn't workRemove capacitor c4010 right next to the lvds connector tracks on the main boardEletrônica Mirage
LG49UK6310PSE
LC490DGJ.ABLA1
Dead, no standby, 12v line with only 3vShorted LED bus killing the voltages on the power supply boardLED kit replacementWorld TV - Sorocaba
LG32LN549C EAX65284601
EAX65284601
Turns off randomly.Cold solder on diode d203 (chopper output) and t101 (chopper).ResolderEletrônica R-TEC
LG OM7560
706AZWS4Q425
Some key stuckDefect in any function of the keysSeverino Ramos Nunes Juvenal
LG32LH35FD
Takes time to callReplace c831, c889 and c829 on mainboardCan put capacitors for 6.3vMitzko BNU
LG32LV3500
Takes time to callC105 smd no pino 7 do ic101 power supplyPardal-x
LGLG32LE5300
No sound or no soundIn my case it was an open track near the sound output.Luciano Fontes
LG42LB6200
TV doesn't turn onTransistor q601 (k10a60w) shortedReplace the mosfetRobson RJM