PHILCO TV Repair: Common Faults and Solutions.
Search: PHILCO
Results: 4741
Results: 4741
PHILCO Repair Guide: Common Issues and Fixes
Brand | Model | Fault | Detailed Problem | Solution | By |
---|---|---|---|---|---|
PHILCO | PCS2700 | TV doesn't work, c913 = 470pf shorted disk killed the power supply, after changing the TV it worked, but there was no (osd) that is menu characters on the screen (cause c612 = 10mf for 50v. no capacity). which sends a pulse to pin 2 of the micro. | Causes c913=470pf which killed the + b and c 612=10uf for 50 v. | Both capacitors were replaced and it was ok. | Armando de Olimpia,Eletronica EvoluSom. |
PHILCO | TP-2052N | I got this TV with a shorted horz.bu2506dx output, I put in a monitor output, I noticed it was getting a little hotter, but I handed it in after 3 days. It didn't generate a problem, I'm going to put it to work even if it explodes or shows me on the screen where the problem is, there was 50vlts on the q 920 so I closed the emitter collector it worked but the horizontal one kept closing I thought it was a polyester capacitor because I had changed the bust and the output It was getting too hot so I took the super magnifying glass that was leaving me lol then I saw a subtle cold weld on the horiz.t702 trafo and that was the problem | Cold solder with yellow transformer | New welding done | astel eletronica sousa jurema ceara |
PHILCO DVD | PHT660/N | Doesn't start | Secondary power supplys with low voltages | Capacitor e11 47 mf exhausted | CALIXSERVICE |
PHILCO | TP1452 1452 | Normal league has sound and no image | Cause it was r812 there was cold soldering it was soldering and the image appears on the TV | alex | |
PHILCO | TV PH21C VERSãO B | Does not turn on stand by off | Q881 (2n5551) short and r881 (100r) open | Replace | alvaro peralta |
PHILCO | PCS2700 2900 E CPH05 | No writing (OSD) | No vertical pulse on pin 2 of the micro | C612 10mf, or r612 10k open | jasvan souza |
PHILCO | TP-2920 | This TV arrived with flyb.furado. | When changing, it came without an image, but the rest of the functions were normal. Look at the 10k and 6k8 open on the abl line next to the fly back. | ELET.JN NEVES Ce | |
PHILCO | TP-2054 | Image without contrast; little shine. rest, everything ok | Dz 701 (8.2v) shorted, on the abl line close to the fly-back. | Replace for new one. | Manoel (Noca) |
PHILCO | PH 21C | Menu stuck | When asked for the password, type 4711 | paulorusso | |
PHILCO | PCM-2044 CPH-05 | 'white noise', i.e. every time white letters (subtitles) appeared, it interfered with the audio. (second defect slightly varied the tuning) | Suspend pin 44 of IC 501 and change c205 to pin 48 (AGC) of the same IC) good luck to everyone. | This email address is being protected from spambots. You need JavaScript enabled to view it. | |
PHILCO | TP2052N | Has sound, tunes, but no image only OSD (functions on screen), with colored lines in the middle of the screen | Check the 45 volts coming from pin 05 of the fly back. check this line. Check if you have 36 volts on the channel selector. From what I could understand, this tension influences the abl | caio | |
PHILCO | TP 2052N | Power supply beeps and turns off | Play-back and the horizontal output with a small leak and the capacitor 706 changed. | DERCIO | |
PHILCO | PC 1405 | Problems in vertical shrunken or def. linearity | Capacitor c609 e resistor r613. | Perse | |
PHILCO | CPH01, PC1401 | Lacks width and the fly back makes a buzzing sound | Capacitor c913. | Perse | |
PHILCO | PCM2046 | Intermittent defect, sometimes the LED flashes, sometimes it does nothing. 150v enters pin 3 of the str50103 and nothing comes out. It keeps emitting a buzzing sound at the power supply. | Solder the c 911 capacitor (220uf x 160v capacitor or replace it, it may be oxidized. | Perse | |
PHILCO | PC 2043 | Image warping | C905 220uf | Perse | |
PHILCO | PC 2004 | Horizontal dark bar | C 607 10 uf. | Perse | |
PHILCO | PCM 2046 | Turns on and off with the LED | R 713 of 100k changed | Replace 100k r713 | Paulo |
PHILCO | PH21SS 21C1PH02-2H | Vertical beam | Janpe w570 with cold welding | Resolder | EletroClaudio Aguas Belas |
PHILCO | PCS2956 ? | With low power supply between 50 and 70 volts | Tl 431. | I replaced the tl431 and the TV wobbled. | This email address is being protected from spambots. You need JavaScript enabled to view it. |