PHILCO TV Repair: Common Faults and Solutions.
Search: PHILCO
Results: 4740
Results: 4740
PHILCO Repair Guide: Common Issues and Fixes
Brand | Model | Fault | Detailed Problem | Solution | By |
---|---|---|---|---|---|
PHILCO | CPH 02 | Inoperative, protection circuit acting | Capacitor c 719 (1 u f x 63v) with loss of capacitance or high esr | ||
PHILCO | CPH 02 | Dead, no audio | Capacitor c 912 (220 u. f x 160v) with cold solder on the terminals | ||
PHILCO | CPH 02 | Inoperative, no audio | Capacitor c 908 (4 u7 x 250 v) with loss of capacitance or high esr | ||
PHILCO | CPH 02 | Inoperative, power supply does not start | Capacitor c 914 ( 2 n 2 ) shorted | ||
PHILCO | CPH 02 | Twisted image | Capacitor c 216 (2u 2 x 40 v) with loss of capacitance or esr | ||
PHILCO | CPH 02 | Folded image at the bottom of the screen | Capacitor c 610 (330 u f x 16v) with loss of capacitance or high esr | ||
PHILCO | CPH 02 | Image to the left of the screen is dark and the rest is very light | Capacitor c 716 (4u7 x 250v) with loss of capacitance or high esr | ||
PHILCO | CPH 02 | Out of horizontal frequency, only half of the screen illuminated | Capacitor c 912 (220 uf x 160 v) with loss of capacitance or high esr | ||
PHILCO | CPH 02 | Out of horizontal frequency | Capacitor c 705 (10 uf x 25 v) with loss of capacitance or esr | ||
PHILCO | PCS-2952 | Inoperative. burns horizontal output | Put bu 2520dx and reinforce the heatsink | ||
PHILCO HITACHI | PC 1603 | Darkens the image, closes the height and width (intermittent) | Power supply stk | ||
PHILCO | PCM 2046 | LED and image blinking | Rook 13 | ||
PHILCO | PC 2138 | Orange color, voltage at the base of q901 must be 2v and has 5v | Tb 1275an | ||
PHILCO | PCM 2046 | With loud buzzing | C316 - 3, uncle | ||
PHILCO | PC 20R38 | Black stripes in the middle of the screen | C607 | ||
PHILCO HITACHI | PC 1603 | Darkens the image, closes the height and width (intermittent) | Power supply stk | ||
PHILCO | PCM 2046 | LED and image blinking | Rook 13 | ||
PHILCO | PC 2138 | Orange color, voltage at the base of q901 must be 2v and has 5v | Tb 1275an | ||
PHILCO | PCM 2046 | With loud buzzing | C316 - 3, uncle | ||
PHILCO | PC 20R38 | Black stripes in the middle of the screen | C607 |