PHILIPS TV Repair: Common Faults and Solutions.
Search: PHILIPS
Results: 14171
Results: 14171
PHILIPS Repair Guide: Common Issues and Fixes
Brand | Model | Fault | Detailed Problem | Solution | By |
---|---|---|---|---|---|
PHILIPS | 29PT4635 | The sound output was shorted out and that's why the whole TV stopped. Here's a tip for my colleagues | I checked everything but after a lot of patience I removed the sound output and it worked | The sound output was shorted out and that's why the whole TV stopped. Here's a tip for my colleagues | This email address is being protected from spambots. You need JavaScript enabled to view it. de valadares minas gerais |
PHILIPS | 21PT9467C/78 SK4.1L | When changing the fly back, the xt mark when it heats up the image starts to shake. | Put a shim on the fly back ferrite. | fgalvim | |
PHILIPS | 20PT424 | It doesn't turn on, the LED flashes and the protection is activated! | C2409 47x160v bad and fly back raw between pins 2 and 3 ov2094/b1 | Replace both | orlando lott |
PHILIPS | 40PFL5606 | Customer reported that device stopped turning on after moving from one location to another | Does not turn on, only 3vstb voltage | Poor contact in the power supply connector on the signal board. | neweletrotech ctba |
PHILIPS | FWM 452X/78 | No sound | Remove q601 q602 (mute) | Bruno nicacio | |
PHILIPS | 20PT4331 L03.1L | When you turn on the sound it's normal, after 10 minutes the sound cuts out | Capacitor 2833 | Replace the capacitor | JMS ELETRONICA |
PHILIPS | 29PT9467C178 | TV turning on with portrait line and 2 horizontal stripes and turning off | Image with horizontal lines and stripes | ||
PHILIPS | 14GL1015 | When turned on, the channel sounds, but the image has open screen-like retraces. | Capacitor c2410 on vertical pin 8 open 100/25, change and go to the hug. | jefferson godoy | |
PHILIPS14 | 14PT316A/78R | No image green screen | Fusion no image green screen | aluizio | |
PHILIPS | 14PT110A 78R | Doesn't start. | Exchange c2551 and c2448 sold out. | jayjunior | |
PHILIPS | 14PT4131 | No audio, no sound when turned on, it made a very low noise, it didn't activate the audio, not even with your finger. | C2444, it was well heated, I put 1000mf/16v | Other similar models pt3131 ... 4331...3331 | Alextecnico |
PHILIPS | 29PT4640 L01.1LAC2K3 | Dark image with traces and small clicks on the tube plate, (there are several clicks per second, 5 times or more) and these clicks are reflected in the image, that is, when the click occurs the image becomes clearer. | I found r3481 and r3482 open, I also changed r3465 and the image improved but there were still crackles, but it was because of the screen being out of adjustment, it was just a small adjustment and that was it, the crackles disappeared and the image was perfect. | This email address is being protected from spambots. You need JavaScript enabled to view it. | |
PHILIPS | DVP 320BK | It only stays on standby, LED indicator flashes or turns on and off in seconds | Low supply voltage, 7v5 zener with leak and exhausted capacitors on the secondary | Replace 6622, 2221 and 2210 | Felipe Farias |
PHILIPS | 29PT554A | Doesn't even turn on the stand by LED | Changed d6540 had 5 volts on pin 1 of ic 7520 | Replace d 6540 | juci |
PHILIPS | FWM593 | No sound | R611 e tr q632 | Just replace it and move on to another one. | eletronica vieceli |
PHILIPS | 20PT122A | Av doesn't work | Enter service mode ground pin 1 memory | Replace to av 01 | ELETRONICA MAURI JUNIOR |
PHILIPS | CTN-BB | Does not do standby | Replace smd transistor position 7601 | Ruyzovich | |
PHILIPS | CTN-BB | Red image with return lines | Replace smd transistor position 7644 | Ruyzovich | |
PHILIPS | CTN-BB | Does not start LED blinks | Replace 12Ω resistance in power supply position 3521 | Ruyzovich | |
PHILIPS | CTN-BB | Does not adjust contrast | Replace resistance (3460) of 10k | Ruyzovich |