Search: PHILIPS
Results: 14170

PHILIPS Repair Guide: Common Issues and Fixes

Brand Model Fault Detailed Problem Solution By
PHILIPSVR457
Does not spin tape.C55 with bad contact. *18Sep98 sp602*
PHILIPSVR456
Varying speedCheck bad contact on integrated ic701 (siscon). * 15Sep97 Jo *.
PHILIPSVR456
Without tune.Poor contact on the trail around r1007. *18Sep98 sp602* c1030. *05nov98h desk*
PHILIPSVR456
No color in automatic (PAL/NTSC).Check welding of resistor r726. * 09Oct97 jo *. check capacitor c13 (68nf). * 26nov97 acm *. check capacitor c20 (try putting 22nf). * 26nov97 acm *. check resistor r726 (cold solder). * 23jan98 acm *.
PHILIPSVR456
Oscillates with forward and backward movements.Check leaky diode d907. * 15Sep97 fr *.
PHILIPSVR456
There are no colorsCheckcapacitor c13 (68k). * 27nov97 acm *. verificar capacitor c64 (18pf). *05nov98 rs342*
PHILIPSVR456
Does not recognize slp speed (low ctl)Verificar: c1113, c1120, c1122 e ic701. * 05ago99 anc *.
PHILIPSVR456
Does not rotate (motor or plate)Stator position 159h. *18Sep98 CP160*
PHILIPSVR456
It doesn't work (it stays off).Add resistor r918 smd (68k) to the power supply. *25nov96 psc nk* ts 901, ts 910. *01Sep98 mg608* c982 with leak or short. *01Sep98 mg608* q901 short. also check ic1201 *01set98 mg608* d
PHILIPSVR456
No characters/menu appear.Ic1301. *18set98 cp160* c1307. *05nov98 h.desk*
PHILIPSVR456
Engine does not stop turning.If display is off, check integrated front panel ic201. * 02Apr97 mjs *. q1102. *198set98 cp160* q701, q702, ic703, with damage causes the engine to start loading
PHILIPSVR456
Fita presa (your ejeta).Check position 45. 04 ma01 pe601 *.
PHILIPSVR456
Tape does not enter the compartment.Check capacitor c952 (820µfx16v). * 09Oct97 jo *. see capacitor c24 (47nf). * 23jan98 acm *. q701. it loads the tape but soon after, it ejects the tape. *08Sep98 h.desk*
PHILIPSVR456
Flashing displayCheck leaky diode d907. * 15Sep97 fr *.
PHILIPSVR456
Display counts quickly (fast).Check crystal 701. * 17set97 egs *.
PHILIPSVR456
Display offAdd power supply resistor r918 smd (68k). * 25nov96 psc nk * check integrated ic704 reset s80728an. * 02Apr97 jo *. Check panel's integrated IC201. * 02 Apr97 mjs *. check open diode d958. * 16sdet97 fr *. add capacity
PHILIPSVR456
Turns off by itself.Check remote receiver ic1202, integrated ic201 do display (upd16312) and check key s1220. * 10jan97 anc *. check ps701 and ps702. * 26nov97 acm *. pos.68 (capstan engine). *08Sep98 sp534* check the existence of r
PHILIPSVR456
Commands do not work (all).Check panel's integrated IC201. * 02Apr97 mjs *. check crystal 701. * 17set97 egs *. ic701. *18Sep98 sp602*
PHILIPSVR456
Commands act intermittently.Check crystal 701. * 17set97 egs *.
PHILIPSVR456
Poor brightness (little shine).Verifique capacitor c24 (smd 47k). * 09out97 jo *.