PHILIPS TV Repair: Common Faults and Solutions.


AIWA
BEKO
CCE
CINERAL
DAEWOO
FUNAI
GRADIENTE
GRUNDIG
HISENSE
HITACHI
ITT
JVC
LG
MITSUBISHI
PANASONIC
PHILCO
PHILIPS
PIONEER
RCA
SAMSUNG
SANYO
SHARP
SONY
THOMSON
TOSHIBA
VESTEL


Search: PHILIPS
Results: 14169

PHILIPS Repair Guide: Common Issues and Fixes

Brand Model Fault Detailed Problem Solution By
PHILIPSL7L
No width (no hor deflection) vertical risk.M5 (horizontal deflection connection) with poor contact. *18Sep98 sp601*
PHILIPSL7L
Noise not somC 2112. loud noise or snoring when increasing the sound volume. * 03Aug98 cp160 *
PHILIPSL7L
Horizontal dark streaks.R 3240 missing or open. the lines are dark on the image as if it were out of sync. *03ago98 pi108*
PHILIPSL7L
Small frameC 2662 (standby extension). frame is reduced on the sides and divided in the center of the screen. * 04Aug98 al142 *
PHILIPSL7L
Searches but cannot find (barr3/sint3).Check resistor 3538 (100k), this occurs because the power supply voltages below the specified. * 19Jul99 acm *.
PHILIPSL7L
Does not come out of intermittent stand by, or does not turn on.Change the 3444 resistor from 10k to 5k6. * 03Aug98 HD *.
PHILIPSL7L
Does not turn on via remote control.Check resistor 3444 change value from 10k to 5.6k. * 19Jul99 azs *.
PHILIPSL7L
It doesn't work (it stays off).Ic 7225, ts 7445 with broken collector. the standby LED flashes intermittently. *03Aug98 CE316* c2423 (smd) with leakage, causes absence of the fh pulse on the pin 37 of bimos. the voltage on the pin must be 1.3 volts.
PHILIPSL7L
No characters/menu appear.C 2403 shorted. irregular vertical and does not have OSD or DOS. * 31Jul98 sc374 * t 7662, 7681 with escape loses osd. * 31Jul98 CE304 * r 3425 open. * 03Aug98 uvrio * ic
PHILIPSL7L
Does not open verticallyCheck open resistor 3412 22k. * 16Jul99 acm *.
PHILIPSL7L
Change channel aloneC2637 (smd no pino 15 do microp). *18set98 sp602*
PHILIPSL7L
Hotel modePut on channel 38, press at the same time for a few seconds () volume (+) volume and OSD on the remote control, Hotel yes/no will appear, select the mode and then press stand by. * 07Oct97 jpba *.
PHILIPSL7L
Return lines (retraction).R 3470 com m.c. ou aberto (+ 180 volts) * 31jul98 cp601 *
PHILIPSL7L
Interference in the imageDiagonal bars on screen with cable antenna signals. in this if you use varicap with better rejection of spurious code 4806 210 47037 * 31Jul98 labor *
PHILIPSL7L
Flickering image (see serr1).Verificar diodo 6461 1n4148. * 19jull99 acm *.
PHILIPSL7L
Jagged image (see train1).D 6461 with leak. the image becomes jagged after some time time. * 31Jul98 CE304 * standby extension leaking after some time. *03Aug98 sp443*
PHILIPSL7L
It works intermittently (see slide2).C 2621 e 2622 (ramal data e clock). * 03ago98 ba601 *
PHILIPSL7L
Dos / menu - does not leave the screen.Ic 7620 (eeprom). writes "f" on the screen and doesn't erase it. to the enter service mode and try to exit, it gets stuck. * 03Aug98 h.desk * TV stuck in hotel mode: set to channel 38, activate simultaneously
PHILIPSL7L
Folding image horizontallyC 2662 com fuga. *21ago98 cp602*
PHILIPSL7L
Distortion in the image.C 2208 (47n) no pino 13 do bimos com fuga. *03ago98 sp224 *