PHILIPS TV Repair: Common Faults and Solutions.


AIWA
BEKO
CCE
CINERAL
DAEWOO
FUNAI
GRADIENTE
GRUNDIG
HISENSE
HITACHI
ITT
JVC
LG
MITSUBISHI
PANASONIC
PHILCO
PHILIPS
PIONEER
RCA
SAMSUNG
SANYO
SHARP
SONY
THOMSON
TOSHIBA
VESTEL


Search: PHILIPS
Results: 14168

PHILIPS Repair Guide: Common Issues and Fixes

Brand Model Fault Detailed Problem Solution By
PHILIPS29SX8674
No sound. (with or without image for TV, VCR).See integrated 7145. * 30jul96 jpba *.
PHILIPS29SX8674
No h/v sync.Integrated 7750 (tda2595). * 13dez95 jpba *.
PHILIPS29SX8674
Sem beepFuse 1301, +13 power supply open. *may 95 jpba*.
PHILIPS29SX8674
Bright spot when turning off or stains.Check fly back welding, control line pin focus and g2 with bad contact or without soldering. * Jan 95 BC *.
PHILIPS29SX8674
Panel without lighting.1911 or 1912 lamps open, replace them with 4822 134 40861 changing resistors 3913 and 3914 to 56r. * 15Jul99 nk *.
PHILIPS29SX8674
There is no contrastCapacitor 2960 open. * Apr 95 jpba *. integrated 7530. * oct 95 jpba *. obs. normal pip.
PHILIPS29SX8674
Does not change the switching.Transistor 7110. * 20dez95 mjs *.
PHILIPS29SX8674
Does not work on 110v.Integrated 7110 (str80145). * 20jul95 jdcc *.
PHILIPS29SX8674
It doesn't work (it stays off).When switching off, the protection indicates er13 and there is no sound, check 7233 (vbe does not work) replace it and add a diode between collector and emitter, with the cathode side being the collector. starting resistor 3136 open. * Apr 95 jpba *. 7110 (str8145a) open
PHILIPS29SX8674
Does not correct east-west7980 Sep 94 jdcc. check 5980 core without ferrite. * 16Jul99 azs *.
PHILIPS29SX8674
Mute does not work (out of sync or without antenna).Fuse 1301 open. * 20Jul95 jdcc *.
PHILIPS29SX8674
Return lines (retraction).Check fly back control pin g2, it may be faulty poor contact or no soldering. * Jan 95 BC *. ic7705 (tda2579b). *03Sep98 al142*
PHILIPS29SX8674
Interference in the imageBars rising on the screen, add a 12nf capacitor in parallel with the demagnetizing coil. *04Oct96 man*.
PHILIPS29SX8674
Negative image.Check resistor 3362 open from +12. * 04Jul96 jpba *.
PHILIPS29SX8674
Banners going up on the screen.Leakage not diode 6530. * 04jul96 jpba *.
PHILIPS29SX8674
Display or dos indicates error.Er13 = see +13 (m17 pin 8) and fuse 1301. * 30jul96 jpba. er5 = see pip module (you can change the er number). 30Jul96 jpba.
PHILIPS29SX8674
Turn off inter. or protect (rew 3 for vcr).Trafo 5945, may be without a nucleus. * mai95 jpba *.
PHILIPS29SX8674
Damage IC or TS semiconductorTransistor 7980, see horizontal linearity graph (can be without a nucleus). * 01may95 jpba *. 7903, see graph 5945 loose core. * 25Jul96 jpba *. 7903, see 2744 (bc848) and 2744 (10nf). *04Oct96 man*.
PHILIPS29SX8674
Damage fuseFuse 1100 open, see 7130 shorted. * 20Jul95 jdcc *. 1100, see 3104 and 3105 amended. *04Oct96 man*. check 3102 (ptc). * 16Jul99 nk *.
PHILIPS29SX8674
Damages diodeDiode 6906, see graph 5945, may be without a core. * May95 jpba *.