Panasonic TV Repair: Common Faults and Solutions.
Search: Panasonic
Results: 2880
Results: 2880
Panasonic Repair Guide: Common Issues and Fixes
| Brand | Model | Fault | Detailed Problem | Solution | By |
|---|---|---|---|---|---|
| PANASONIC | TC14C4/20C4 | Burning f801 and f802 | Ic802, replace c812 | ||
| PANASONIC | TC14D1/20D1 | Folding the image at the top | C412 | ||
| PANASONIC | TC14C1/20C1 | Loud sound and won't change channels | R881, r882 | ||
| PANASONIC | TC-14C2/20C2 | Unstable vertical | C410 | ||
| PANASONIC | TC-14C2/20C2 | Dead and beeping | Flyback | ||
| PANASONIC | TC-14C2/20C2 | Image shakes when adding volume | 16v power supply low and r863 | ||
| PANASONIC | TC-14C2/20C2 | Image very bright and does not darken | 19 | ||
| PANASONIC | TC20C6 | Inoperative, relay knocking | Open r802 or r803 (470k) | ||
| PANASONIC | TC-29V50B | Burning of ic802(str), d184, c812, q804 | In the first production batches the resistor r841 was assembled very close to the heatsink, which will cause cold solder heat dissipation and oxidation at its terminals. as this resistor is located between the drive and the base of the power transistor, this bad contact will cause IC802(str), d814, c812, q804 | Solution: 1) after the burned components are replaced, the resistor r841 must be removed, checking that its value has not been replaced, if it has been, it must be replaced. if its value is ok, its terminals should be sanded and resoldered into its position on the board. 2) please take this countermeasure for all devices that pass through an authorized workshop for maintenance, whether the device is presenting or not problems at the power supply. | |
| PANASONIC | NI | ||||
| PANASONIC | TC-29V50B | Device without sound | Ysa02 (Sixa1279s) | ||
| PANASONIC | TC-20/29G11 / | Does not turn on, without 9v power. | D602 | ||
| PANASONIC | TC-29V50B | Burning of ic802(str), d184, c812, q804 | Cold solder not resistor r 841 | ||
| PANASONIC | TC-14/20C7 | Weak image, tune with drizzle | C112= 10nf | ||
| PANASONIC | TC-14/20C7 | TV arms and disarms, (relay knocking) | La-7837 and c456= 100uf | ||
| PANASONIC | TC-14/20C7 | Vertical closed | C116=10nf | ||
| PANASONIC | TC-29AV1 | Dead | Q501= 2sd1175 | ||
| PANASONIC | TC-29A9 | Turns off after a few minutes | D555 = 1n4148 | ||
| PANASONIC | TC-21V50 | Dead | Ic801 e r808=o,47 | ||
| PANASONIC | TC-14C1-U | Out of tune | R61= 8k2 |