Panasonic TV Repair: Common Faults and Solutions.
Search: Panasonic
Results: 2880
Results: 2880
Panasonic Repair Guide: Common Issues and Fixes
| Brand | Model | Fault | Detailed Problem | Solution | By |
|---|---|---|---|---|---|
| PANASONIC | Z5 TX14S2T | Lack of height with top foldover | R521 8.2r 2w gone high (loptx pin 8) part no. erq2gjp8r2 | ||
| PANASONIC | Z5 TC14S1R | Dead - f801 o/c | D807, d808 & chopper ic801 str51203m - advisable to get original replacement chip from pan | ||
| PANASONIC | Z5 CHASSIS | Trips at sw on after initial rush of eht with led flashing | Prot sw q502/3 activated cutting off line drive; short out c507 to disable trip; set now operates; r525 300k ½w o/c | ||
| PANASONIC | Z5 CHASSIS | Tripping with ht low | C823 10nf 500v in snubber cct leaky | ||
| PANASONIC | Z5 CHASSIS | No signals | 4mhz xtal in tuner dry joints or not soldered; (30v line is the tuning volts & mb is 11v supply) | ||
| PANASONIC | Z5 CHASSIS | Led flashes & psu whistles | R821 330k in trip cct o/c | ||
| PANASONIC | Z5 CHASSIS | Lack of height with top foldover | 30v supply low due to r521 8r2 hi res | ||
| PANASONIC | Z5 CHASSIS | Dead - no psu activity | Str51424 chopper chip had internal s/c between pins 2 & 4 | ||
| PANASONIC | Z5 CHASSIS | Dead | Ic801 overheating - d806 au02v0 leaky | ||
| PANASONIC | Z5 CHASSIS | A look at the panasonic z5 circuit | See tv mag aug - oct 1996 | ||
| PANASONIC | Z5 | Trips with st/by led blinking | R525 300k 1/4w replaced with 1/2w (under r564 near pug e7) | ||
| PANASONIC | Z5 | Tripping with st/by led blinking | R525 300k 1/4w replace with 1/2w (under r564 near plug e7) other causes- r810, r813, r818, r821 330k, c823 10nf 500v subber cap | ||
| PANASONIC | Z5 | Tripping | D806 au2avo (measuered ok) | ||
| PANASONIC | Z5 | Tripping | All these items are in the psu primaryr810/r813/r818/r819/r821[330k] c823[10nf 500v] snubber capacitor | ||
| PANASONIC | Z5 | No picture sound ok - blank raster | No line pulses at pin 38 ic601tda8361- q504 sm bc847b faulty | ||
| PANASONIC | Z5 | Not cabbage | Eeprom ic1205 faulty - no set up data for ic601 | ||
| PANASONIC | Z5 | Int thick lines across screen | Dry joints tuner | ||
| PANASONIC | Z5 | Dead one quick flash of standby light at switch on, very faint ticking from power supply, low 125v supply | R813 and 821, 330k 1/2 watt | ||
| PANASONIC | Z5 | Dead no st/by light | Ic801 str51424 | ||
| PANASONIC | Z5 | Dead but standby light on power supply chirping loudly, no 125v. | R812 33Ω metal film special from seme part no. erq12hj330. |