SAMSUNG TV Repair: Common Faults and Solutions.
Search: SAMSUNG
Results: 3752
Results: 3752
SAMSUNG Repair Guide: Common Issues and Fixes
Brand | Model | Fault | Detailed Problem | Solution | By |
---|---|---|---|---|---|
SAMSUNG | CX6840 SCT12B | Deformed image | E/w part does not correct | Sub c419 =10μF c421= 2,2 μF 160volt | |
SAMSUNG | CN 5048V | Background image, with overlapping portraits. | The TV had an unclear image with reflections, but it was possible to identify that it was in color. I tested several components around the ic201, but I didn't find any defective. I just had to change the ic 201 to solve the problem. | ||
SAMSUNG | CN 3338V | Doesn't start | C909 - 33m | ||
SAMSUNG | CN 3338V | Volume + and channel - don't work | Micro - shorted pin 16 kills the 5v voltage drops to 3v and q7620 is shorted | ||
SAMSUNG | CN 3338V | Does not turn off on the remote control | Q901,q904 | ||
SAMSUNG | CN 3338V | Doesn't start | C909 - 33m | ||
SAMSUNG | CN 3338V | Volume + and channel - don't work | Micro - shorted pin 16 kills the 5v voltage drops to 3v and q7620 is shorted | ||
SAMSUNG | CN 3338V | Does not turn off on the remote control | Q901,q904 | ||
SAMSUNG | SYNCMASTER 3 | No horizontal synchronization | Broken track between logic cable connector and trc pci | ||
SAMSUNG | SCT11B/D CI3373 CI5079 | Dead with dz801 or ic801 s/c | If signs of overheating round faulty components - psu produces excess ht in st/by; in st/by 125v ht should rise to 140v but does rise to 180v in some sets. replace dz801 with pt no 0403-000691; ic801 replace with aa13-20004p; hc801 replace with aa13-20004m & if still excessive ht change c852 for 2301-000111 | ||
SAMSUNG | SCT11B CI5373T | Reduced frame and no video/sound | Replace eeprom ic902 (b4000-0135) | ||
SAMSUNG | SCT11B CI5373T | Dark pic at switch on, ok after 10 min | Loptx (aa26-30001y) | ||
SAMSUNG | SCT11B CI5079T | Frame jitter | Replace hc301 (aa13-20002w) | ||
SAMSUNG | SCT11B CI5079T | Frame collapse | R410 o/c | ||
SAMSUNG | SCT11B CI5079T | Frame collapse | Ic201 ms2309bsp faulty, no drive from pin 18 (1204000431) | ||
SAMSUNG | SCT11B | Dead, fuse blown | Replace c803 2n2 800v (2303-000163 or a1102-0331), dz801 r2kn (0403-000691), ic801 (aa13-20004p), hc801 (aa13-20004m). note: hc801 and ic801 must be "c" version! | ||
SAMSUNG | CI5373 SCT11B | Tripping | Loptx arcing - when replaced field coll; hic301 vpg101 hybrid chip | ||
SAMSUNG | CI3373Z SCT11B/D | Service mode access | Stby/p.std/help/sleep/power on. controls vol +/- channel +/- exit with status,{all on r/c} | ||
SAMSUNG | CN-5049V | Very dark image | Change the 03 open or altered resistors r511,512 and 513 of 100k/1%/1/2w on the trc PCI. if that doesn't solve it, change the trc socket | Replace o capacitor rk (10nf/3kv) na pci do trc | |
SAMSUNG | CN-5049V | Blurred and undefined colors | Change the 03 open or altered resistors r511,512 and 513 of 100k/1%/1/2w on the trc PCI. if that doesn't solve it, change the trc socket |