SEMP TV Repair: Common Faults and Solutions.
Search: SEMP
Results: 2828
Results: 2828
SEMP Repair Guide: Common Issues and Fixes
| Brand | Model | Fault | Detailed Problem | Solution | By |
|---|---|---|---|---|---|
| SEMP | TV 14 U13 | Washed canvas | Eeprom memory | ||
| SEMP TOSHIBA | TV 2070 | Dead | Leaky 828 diode | Alvanyr. This email address is being protected from spambots. You need JavaScript enabled to view it. | |
| SEMP | 1484-HAV U13 | Str-g5653 exploded and as soon as you put in a new one it explodes and rips the piece out immediately. | Solution: replace the diode d-876(5v6), the resistor r-876(680r), and the capacitors c-875(470p) and c-876(1000p), for the capacitors you can put the disk replacements c-875( 471) and c-876(102) and replace the regulator q-801(str-g5653). | samuel leite | |
| SEMP | TV 14A82 U8 | TV with a dark or slightly greenish screen, this defect appears to be a defect in the ci q 501. | Broken track that takes +9v to pin 52 of ci q 501 | Redo the track that connects pin 52 of ci q 501 to diode d 161. tv ok | GEORGE PONTES |
| SEMP | SD 7070 SD 7050 | Dead power supply | Ci u1 open I put a new one it damaged too | Power supply capacitor c1 c2 dry, I replaced it, solved the problem | marcos melo ;cascavel ce |
| SEMP | TV 1483 AAV U9 | Dead | R 860 (100k) aberto | Replace | Manoel |
| SEMP | TV 2083 U11 | No uhf channels | This happens when changing the eprom and resetting it | Enter service mode replace tuner protocol | Alvaro |
| SEMP | TVC-142VS | Stop everything, str output zero volts | Transistor q807 | Original scrap only, replace with bc637 or 639 (inverted) | Tecnardi |
| SEMP | TV2922 LEM9 | Hoarse left a/f sound | C637 47uf 25v | SIDNEY | |
| SEMP | TV2083AAV | Difficulty calling | Replace capacitor c864 100mf 50v 100mf 250v | odair | |
| SEMP | TV2089 | Takes time to call | C887-100uf-16v referen-21v secondary | jaimecampo2007 | |
| SEMP TOSHIBA | TV1480 | No characters and retrace lines on the top of the tube. | The IC303 was replaced, the TV was ok. | Eletronica LM | |
| SEMP | TV 2982 LEM9 | Dull TV worked on the fly back (screen) and did not resolve | I replaced c 902 and the TV worked normally | alberto | |
| SEMP | TV2090 | Dark image, the screen did not have 500v | C 902 on trc plate tube socket | I replaced it and everything was fine | FERNANDO ROCHA ELETRONICA ROCHA |
| SEMP | TV2092LAV U16 | Mirrored retrace lines at the top. | C 305 100uf35v without capacitance caused by thermal radiation from the vertical IC heatsink. | MANTENOPOLIS | |
| SEMP | TV2080E | Does not tune, dark screen and no sound. | R841/220r (open) | ||
| SEMP TOSHIBA | 2070E | No picture, normal sound | Ci ta8718n pin17 (h.blk) open track | Reconstruction of the cracked trail | fernandodvdt |
| SEMP | 1491 KAVU15 | Inoperative does not turn on | Horizontal transistor shorted | Replace bu 808 | marcos |
| SEMP | DVD 6070 | In pscan mode | Press tx pscan and then ok | AdrianChapadão | |
| SEMP TOSHIBA | 2091 KAU U 14 | The screen works but the image is dark, I changed the flyback, but it remains dark | Friend, this Toshiba 2091 TV, it gave me a lot of work, but I managed it, the image was dark, the screen worked but it was still dark, I changed the flyback it remained dark, it only got good when I changed it, c 902, ceramic in RGB, I took it out and put another one in, oh it was good, thanks friend, This email address is being protected from spambots. You need JavaScript enabled to view it. | zearis |