Samsung TV Repair: Common Faults and Solutions.
Search: Samsung
Results: 3759
Results: 3759
Samsung Repair Guide: Common Issues and Fixes
Brand | Model | Fault | Detailed Problem | Solution | By |
---|---|---|---|---|---|
SAMSUNG | CL21K40MQ | Inoperative. STBY LED is off and the power supply secondary voltages are absent. | 27v zd803 and d805 shorted at the power supply | Manoel L. Silva | |
SAMSUNG | CL21K40MQ | Dull and killing screen tension. screen short. | Cinescopio | Manoel L. Silva | |
SAMSUNG | CL21K40MQ | When turned on, a blue screen appears with retractions, then it folds horizontally and chirps | L307 open and ic501 tda6107jf shorted. | Manoel L. Silva | |
SAMSUNG | CL21K40MQ | Dark screen, access filament and channel sound. | Ci tda6107jf, position ic501 on the socket board. | Manoel L. Silva | |
SAMSUNG | CL21K40 | Without image and with sound | Tube socket | Manoel L. Silva | |
SAMSUNG | CL21K40 | Inoperative with LED off, | Dz803 12v shorted. put an 18v diode, because with 12v it might not work. | Manoel L. Silva | |
SAMSUNG | CL21A551ML | With blind-type bands on the top | R310 open in parallel with the vertical coil | Manoel L. Silva | |
SAMSUNG | CL...... | Turning off | First step do the reset. | Manoel L. Silva | |
SAMSUNG | CB5052X P68SC-N-02 | Does not start. | Cold welds. The primary power supply capacitor was replaced. | Manoel L. Silva | |
SAMSUNG | CB5020 P58SC | Tuning does not stop, when trying to tune it does not stop on any channel. | Substituir r116 (120kΩ). | Manoel L. Silva | |
SAMSUNG | CB3373Z P1B-01 | Lack of vertical synchronism. image passes vertically. aliased caption. | Cold welds. | Manoel L. Silva | |
SAMSUNG | CB3373Z P1B-01 | Squeaking at the power supply in stby. LED flashes when using the control, it does not flash with the keys. | L803 at the power supply. c905, c906, cu01 and c911 next to the computer. | Manoel L. Silva | |
SAMSUNG | CB-3373Z P1B-01 | Lack of synchronization in subtitles and some vertical instability in certain channels | Retouched the coil (turn to the left) of the fi input does not do everything, pins 49 and 50. | Manoel L. Silva | |
SAMSUNG | 34Z6PQ | Didn't leave. power supply ok as well as the micronas starting voltages too. | Micronas software was just updating the micro | Manoel L. Silva | |
SAMSUNG | 34Z6PQ | Excess width and ew correction does not work | C415 without capacitance and mosfet q 801 irf630 | Manoel L. Silva | |
SAMSUNG | 34Z6PQ | Burning the horizontal outlet without apparent cause | The horizontal output transistor was replaced by a 2sc5446, isolated with mica. | Manoel L. Silva | |
SAMSUNG | 29Z6PQ | With clicks. does not generate mat. It doesn't turn on and the LED keeps blinking along with the so-and-so. | Mrs. D. Sam is making a joke | Manoel L. Silva | |
SAMSUNG | 29M21MQ | High power supply 160v | R 821 amended | Manoel L. Silva | |
SAMSUNG | 29M21MQ | The 130v power supply gives a pulse of 240v when plugged into the socket and then drops to zero | Power supply transformer | Manoel L. Silva | |
SAMSUNG | 29M21MQ | Works for a few hours and turns off | R821-120k r816-133k little changed | Manoel L. Silva |