TV Repair: Common Faults and Solutions.
Search:
Results: 87573
Results: 87573
Repair Guide: Common Issues and Fixes
Brand | Model | Fault | Detailed Problem | Solution | By |
---|---|---|---|---|---|
PHILIPS | 29PT4631/78R | When turning on the TV on the remote, the LED goes off, but the TV does not turn on | In my case it was the transistor q7461 bc 337 and the q7463 bc 327 if you don't have these transistors put the bd 135 in the bc337 place and in the place of the bc327 put the bd136 | vitor | |
SEMP | DL3244(A)W | Tv always dl3244(a)w back light off (solved) | TV with back light off, defect in resistors r753 and r755, both 150k SMD, close to the LED connector, remove and clean, the glue starts to conduct. | Clean glue from resistors r753 and r755 | SILNEI |
TOSHIBA | 14" U15 | Turns on with dark screen without image without sound without characters when the screen increases, the displey opens with return lines | R413 - 3k9 | Just replace and get the farmiria. | Eletrotião |
AOC | L32W931 | When plugged in, the red LED lights up, when you press the power button, the red LED flashes twice and comes back on and does not turn on. | Power supply defect, capacitors c593 and c594 exhausted. | Capacitors replaced based on other tips sound on the site. After the replace it worked perfectly. | Margutek.bva |
SEMPTOSHIBA | XB4351MP | Very low sound comes out | Lack of -12v | Replace resistor r46 valor 410r 2w | JORGE TV TÉC PARANÁ |
PHILIPS | 32PFL 3404 | TV turns on straight away, tsound is a loud whistle on the speakers with horizontal stripes | Oxidation around the microprocessor | Remove the shield from the microprocessor and clean around it with a toothbrush, I used aqua raz solved | Laercio umuarama |
PHILIPS | 32PFL3007D | The sound turns on and the lights don't turn on | You oz9976 | So replace ci oz9976gn | miguel |
SONY | KDL-39R475A | Turn on, turn on the screen has audio but no image | Test pin 15 of the LVDS cable, if it doesn't have 12 volts, loosen the cable, increase it to 12 volts, test the capacitors on the TCOM board, with the TV upside down on the left side. | In my case, capacitor 287 was shorted! But it could be something else nearby that was shorted. | Rodrigo vipo |
TOSHIBA | MC-855MUS | Not reading cd | I bought a soh-ad5 head unit from an electronics store, I unlocked the soldering ball, it didn't read the CD, I replaced it in the store, this second lens didn't read it, I thought it was incredible, I searched for an original one on the free market with the complete mechanism, I unlocked it, I put the CD in, it read it, Look at the difference, this type of device only accepts the original unit | Resolved | Andrei |
PHILCO | PH39F33DSG | Turns on normally for a few moments and turns off the black light, looking like burned out LEDs | Defect on the power supply board u201 viper 17h = l = similar | MACSOM | |
PHILCO | PH21B | Off, when plugged in, the LED flashes, the power starts to generate and dies, then all you have to do is unload the caps. | Transistor v553 2sc1815 | To replace | gdp2 |
LG | 21FJ8RL | Break and cut. try breaking twice and turn off the LED. The Q16 was removed, the vertical was replaced and nothing. | R816 and runs for the hug ................ | JK Eletrônica PE | |
LG | 50PG30TR EAX42062803(0) | Blurred and distorted image also applies to 42 inches | Capacitors c1038 and c1044 both exhausted 100uf 16v | Replace them, common electrolytics fit.. if it doesn't work out, also replace the c1019 47μF 16v | Flávio SBC, SP 11 947182971 |
PHILCO | PH-24M LED | Without audio - 12v voltage, drops to 6.5v | Q3, (fet ao3401 smd) shorted or with changes. | Replace - for a new one preferably. | Severino Silva |
SEMP | TV-2934 | Low power supply, does not light the st-by | Transistor q604 a1013 shorted | Replace transistor q604 a1013 | jean alves |
DYNASTY | 25241 | Doesn't start | Bursting irgb | Check everything on the primary and secondary transistors, in my case it was low electrolytic on the primary | ajm |
PHILIPS | LC424 1W | Does not arm the power supply by hitting the relay | Capasitores eletroliticos c844,c843= 150x35v e 866,842=22x35v | Replace without measuring | Arasonic |
PHILCO | PH21SS | The LED is blinking, and tsound are no voltages on the power supply's secondary, with only 34 volts on the +b. | 819 diode near shorted transformer | Replace it, in my case it was just him and the TV returned to normal.. | Rafael |
PHILCO | PH51U20PSGW | Doesn't start, doesn't do anything. | Without the 5 volts of standby, nor of the ps_on. (in this case the ps_on has 5v). | Diode d901, q308 and q309 replaced. | Josiano |
CCE | 29USP | Expanded image ....( ).... stretched to the sides. | Q407=PSD46 | Alextecnico |