Search: LG
Results: 4833

LG Repair Guide: Common Issues and Fixes

Brand Model Fault Detailed Problem Solution By
LG32LW300C
TV doesn't turn on without STBY.Defective main board.Dc dc converter circuit ic400 short, causes c406 and 405 to leak or short, replace them.RNSPTEC
LG32LB550B
TV doesn't turn on only on ST BY.Defective main board.Audio circuit, c5641 5640 c5620 5621 10μF smd capacitors with leakage or short, killing voltages on the board.RNSPTEC
LG32LN540B
Standby LED does not lightPower supply capacitor shortedSolution c103 100μFx50vCésar
LG50PN5400
No image va and vs ok without 18vC505 in short plus smd capacitor c483 in short 2.2nReplaces of the same c505 in short plus smd capacitor c483 in short 2.2nEduardo Fonseca
LG50LB5600
The TV turns off by itself after 22 minutes on average and when you increase the volume the TV goes from few to few digits, it doesn't work..., it was reset, done "instop" and even then the defect manifested itself. recorded eprom and still didn't solve it.I called LG and opened a technical ticket, I didn't get a response until today, because from the beginning I suspected it was a fault coming from the digital signal sound in my city. But on that day that I called LG, the technician who answered me told me some information that I found interesting, she asked to see the "dtvi interactivity" function in the options menu if it was on or off and it was on.Continuing, I tested everything possible on the TV with other boards: main board, power supply board, IR board, TCON and the defect continued. Then I discovered that only on the Globo channel the TV had a defect, which confirmed to me a defect in the digital signal coming from the broadcaster, detail, if the interactivity function is turned off, the TV does not show the defect on the Globo...MIGUELTV
LG50LB5600
TV turns off by itself after 22 minutes on average, reset, instop and still the defect manifested itself. recorded eprom and still didn't solve it.I called LG and opened a technical ticket, I didn't get a response until today, because from the beginning I suspected it was a fault coming from the digital signal sound in my city. But on that day that I called LG, the technician who answered me told me some information that I found interesting, she asked to see the "dtvi interactivity" function in the options menu if it was on or off and it was on.MIGUELTV
LG42LM3400
The TV arrived, it showed the logo and the black laithe was turned on without anything working.Electroliquid capacitor c206 10/100, c201 10/100, c202 25/470Replace the capacitors and run for the hugMC BOSCA
LG RP14CB25A
Dark screen and no sound on previously tuned vhf channelsAfter cleaning with tinner on the welding side, the varicap was normalEliel Magno
LGOM5560
Protect s.the power supply does not send power to the amplification.Replace of the 3 pc817 optocouplers of the power supply.Alessandro Barcelos
LGRP-21FE85G
Green screen, with retraction linesDefective tube socket.Replace tube socketMARCONES DE ARARIPINA-PE
LGCJ98
It didn't turn on, 14va varyingDiode d961 shorted, after replacement it started working normally again.Eletrônica Mirage
LG42LE4600
The standby switch turns from red to white, does not activate the backlight, has no lvds or audio signals.Main ci with cracksReballing resolvedu.
LG CM 4350
S-protectLack of 12 vReplace the regulator ic931 kia78r12Eletronicazetec
LG 50PT250
After a while it was on, the pixis sparkledI removed the 2.2r resistors and shaved six terminals. I resoldered them and it was greatCabeça
LG42LF20FR
It doesn't turn on, and sometimes it turns on and off, the stand by LED doesn't light upCheck main pci reset switch circuitIn my case it was capacitor c812, but it could also be the key, if it shorts out and sends 5v to the other side, thus locking the deviceAdemar
LG42PQ20R
When activating the power, the LED goes from red to blue, the blue LED stays on but the green LED does not sustain it. Tsound is a lack of VA and VS voltage. power supply maintains 5v but hits the relay and disables the rest.Power supply pcb defect, changed q951(fqpf 9n25c) changed close to the ysus output connector. in this case without defects on ysus, 08/2023.Hugs
LGRAD114
Turns on, tsound is no sound.Strw-6753 short on power line; changed ic901; q904(20v power supply); zener zd911; zd901; pc901 and d901The above components were replaced; device ok,Valdecir Schena
LG42LN5400
RestartingCaboReplace cable that connects the power supply to the mainBrackmann
LGW1752T
Does not turn on the back lightNpn smd transistor q303 with open emitter, 5v comes out to power the ic301 on pin 2 with pson activated.Eliel Magno
LGCM8350
FR4-2L 1.6T
Sound cutting out occasionally, disconnecting csd (pin 5 irs) from all irs.Raise Q710 to locate faulty channel.Ic701 irs2092 com flashing...BRITO