Search: LG
Results: 4833

LG Repair Guide: Common Issues and Fixes

Brand Model Fault Detailed Problem Solution By
LG29CC9RL
L1
Total stopIc-802Replace it for the sameELETRONICA CAVALCANTE EM MARTINOPOLE-CE
LG29CC2RL
L1
Completely off with a slight hiss at the power supplyAclopador aberto ic-802Just replace it for a new one and hugsELETRONICA CAVALCANTE EM MARTINOPOLE-CE
LG42PQ30R
Turns offReplace ic 801 l6599dMaster Eletronica
LGLM-U550D
Doesn't startD947 =sb360 power supply.Mário Tavares
LGCP-15Q90A
Two Ñ leaguesSwap c 826 (2200mf/16v) power supplyESPER
LG26LG30R
When turning on, the TV keeps turning off and on by itselfThis TV uses the eay40503202 power supply PCI, I've seen 2 types of power supply for the same TV. In my case tsound was no point in modifying anything and tsound are components that don't exist in this model.After several unsuccessful attempts, I replaced all the caps. secondary electrolytics of the power supply PCI and the defect was resolved. good luck!ESPER
LG26LG30R
When turning on, the TV keeps turning off and on by itselfThis TV uses the PCI power supply eay40503202, I've seen 2 types of power supply for the same TV. In my case it didn't helpESPER
LGRP29CC90
No image with character and sound, but no imageMicronasReplace the same with the eepromEletronica Megatron
LG21FU1RL
TV turns on then protection activates.D302, openReplaceThis email address is being protected from spambots. You need JavaScript enabled to view it.
LG21FU4RL
Not workingStrw6554a e cap. 2200x25vThe replace of the sameHIPERELETRONICA SERVICE (MARCELO MARAIAL-PE)
LGLH-T252SC
HOME THEATER
Does not turn on (lightning).I changed the ic 901 (stra6251), it turned on but no sound, I changed the ic 902 (ice3b3065p) and q910 (2sa1268).FERNANDO S
LG42LG80DF
Lamps blink a few times and then work normallyChanged pfc circuitR623 replaced, if it is ok, check the entire association of this line, tsound are 4 smd resistorsRoberto Consertos
LGRP-29CC90
TV with relay hitting power supply does not stabilizeC-822 470x25 in line secondary photo couplerfrancesco
LG42PJ350
PU01A
The TV turns on, standby is on, when turned on the relay activates and then disarms and the TV does not come out of standby, just unplug it and wait a bit.When turning it on, check if tsound is a 5v1 voltage on the p813 connector, if not tsound are problems with the 5v1 power supply.In my case, it was resoldering the entire power supply, and I replaced the dz101 (6.8v) and the photo coupler connected to the dz101 diode.joaomvjr
LG42PJ350
PU01A
The TV turns on, standby is on, when turned on the relay activates and then disarms and the TV does not come out of standby, just unplug it and wait a bit.When turning it on, check if tsound is a 5v1 voltage on the p813 connector, if not tsound are problems with the 5v1 power supply.joaomvjr
LG30R
LED blinks twice but doesn't turn onWhat to dolio
LGRP-29CC26BRS
Horizontal widthDiode d401ResolderGuarnieri
LGRP21FE85G
Vertical folded at the top (stretched) and the ic 804 regulator that regulates the voltage of 9volts and 5volts on fire.The cause was the regulator itself changed due to the power supply being high because when I changed the regulator and turned on the TV, increasing the volume the image shook and the power supply went up, so I just changed the power supply str and everything was normal. one more for friends.Ic804 and the power supply str.<small>This email address is being protected from spambots. You need JavaScript enabled to view it.</small>
LGCP20C85
Doesn't start.Activating protectionProtection triggered by the vertical shorted, turning off the d 301 the TV started working again, but leaking, in conclusion, a holey fly back leaked onto the board and caused the vertical output to short out, replacing the two was perfect.CALIXSERVICE
LG29CC2RL
Wavy bands on the sides of the screen and bands at the top and bottom with fine scratchesElectrolytic capacitor c 415-1000//25ELETRONICA LELO