MITSUBISHI TV Repair: Common Faults and Solutions.
Search: MITSUBISHI
Results: 1346
Results: 1346
MITSUBISHI Repair Guide: Common Issues and Fixes
| Brand | Model | Fault | Detailed Problem | Solution | By |
|---|---|---|---|---|---|
| MITSUBISHI | TC-1498 | Blue screen with sound | Change tube socket | This email address is being protected from spambots. You need JavaScript enabled to view it. | |
| MITSUBISHI | TC 2099 | Blinking led | C 907 e c 906 | endrew | |
| MITSUBISHI | TC1492 | Correcting a small error from our friend djalma | Power supply beeping, with excess width capacitor c309 with changed capacitance, the electrolytic capacitor c306, 400v 330uf, stopped beeping and the width returned to normal | Correcting a small error from our friend djalma | Nino, eufrasio-24@hotmailcom |
| MITSUBISHI | FP2101 | Dead | The TV was stopped, killing the power supply, when I disconnected the +b pin of the flyback the power supply was normal, it seemed to be the flyback defective, but it was the (ic 651, tda 6107jf) rgb amplifier. | silva2 | |
| MITSUBISHI | TC1492 | Replaced the c309, it stopped beeping and the width returned to normal | C309 capacitor with altered capacitance | Replaced the c309, it stopped beeping and the width returned to normal | djalma milan |
| MITSUBISHI | TC1492 | The TV works normally, the power supply keeps beeping and the image is too wide | Replaced capacitor c309 with changed capacitance | DJALMA MILAN | |
| MITSUBISHI | TC 2099 | Diagonal bars on the "interference" screen | C705 1mf/50v, micro controller region. | Capacitor replaced | This email address is being protected from spambots. You need JavaScript enabled to view it. |
| MITSUBISHI | TC2099 | With image without horiz synchronization. | Cap elet, c705 1/50v | haecio | |
| MITSUBISHI | TC 2098 | Poor width | Capacitors 555 and 556 of 5n6 and 4n7 | Replace - check the power supply | Moré |
| MITSUBISHI | TC2010 | High power supply | He softened | Carlos | |
| MITSUBISHI | TC2098 | No sound and image collector transistor below 60v | Change power supply regulator | eletronica house tuta | |
| MITSUBISHI | 2099 | Sparking in the socket | Fly back | eletronica house | |
| MITSUBISHI | TC-2040 | Absence of color | C-613 | Lauri | |
| MITSUBISHI | CS26EX1 | Turns on normally, sound and image, after a few seconds there is a black picture, with only the image remaining 1 centimeter on the sides | Poor eeprom | ||
| MITSUBISHI | TC-2018 | Std-by led on, does not start | Solda fria no fly back | ||
| MITSUBISHI | TC-1418 | Keyboard does not work, turns on does not change channels, does not increase or decrease the sound | R725 changed | Andrade Sequeira | |
| MITSUBISHI | TC-1499 | Does not start | C905, c906, c907 next to str6707 | ||
| MITSUBISHI | TC 1418 | White screen with characters | Enter service mode and turn off blank mode | KELSON | |
| MITSUBISHI | TC 2010 | Dead | Blown fuse, rectifier, q901 and ic 901 faulty | Shorted rectifier, faulty q901 and ic901 | miguelito |
| MITSUBISHI | TC 1418 | Just on standby, doesn't turn on. | Ic 251 faulty 9v voltage regulator, output voltage below normal, triggering protection pin 30 of ic701 (micro) x-ray | Replace ic 251 9v regulator | MAGAIVER |