Search: MITSUBISHI
Results: 1346

MITSUBISHI Repair Guide: Common Issues and Fixes

Brand Model Fault Detailed Problem Solution By
MITSUBISHITC - 2010
Black band at the bottom of the tubeC - 453 de 220 uf 25vReplaceMauro Mascarenha Tel. (88) 981422821 Parazinho - ce
MITSUBISHITC-2010
Image kind of erased, blurred, similar to a weak tubeAbl capacitor pin near the flyback on the acl output with cold solderResolder the capacitor and problem solved
MITSUBISHI TC-2009
Half closed imageAltered vertical ci do la7837paulistana pi
MITSUBISHI TC-1418PS
It just stays on standby and doesn't turn onR571 de 8.2ΩReplace r571 burnedGilson S.E
MITSUBISHITC 1410
High horizontal voltage of 200 v1 k resistor open position 955 near the couplerJoel som
MITSUBISHITC-2010
Very dark imageCapacitor c653Eletronica tensao R Jacuipe
MITSUBISHITC-2010
Very dark imageCapacitor c653Tec flavio
MITSUBISHITC -2098
TV does not turn on power supplys oscillating with noise tic tic tic type symptom of burnt horizontal thThe problem was the primary power supply capacitor c 907 of 22uf x 100v exhaustedAfter changing it, the TV works againASSISTEC MANARI-PE
MITSUBISHI TC-2018 PS
Does not oscillateR571 does more b fly.blackJOSE HUMBERTO F SANTOS
MITSUBISHITC 2010
Does not turn on the power supply making tic, tic, tic, tic, tic...ticIn my case it was a 470pf capacitor under the board in position c564. he was short.Capacitor under the board in position c564 shorted.MARCONES DE ARARIPINA-PE
MITSUBISHI TC-2018PS
Stand-by LED access activates the key to turn on and nothing happens,After changing several suspicious components with no results, I decided to change the ci 101 microprocessor and the TV returned to normal operation.Val
MITSUBISHI TC 2018 PS
Does not come out of stand byDrive transformer, close to the fly backNEW PEK ELETRÔNICA
MITSUBISHI TC 2918PS
TV burning horizontal outputCapacitor c571, take it from the horizontal drive transformer, it was dry, solution to change, capacitor value 1mf for 160 vdc,Dinei Botelho
MITSUBISHITC-1410
LED is on but won't turn onThe cause of the defect was r571 and c567Replace of the sameASSISTEC
MITSUBISHITC 2050
Normal image, and no sound. just a loud noise in the phone.Capacitor 2200uf/25v na power supply seco.MARCONES DE ARARIPINA-PE
MITSUBISHITC1410
Stand by led on, when pressing the power button it turns off, but tsound is no imageResistor 571 8r2 open
MITSUBISHITC1410
EV02
Plugs into the socket and only turns on stand by by pressing the on button, it turns off and does not generate high voltageResistor r571 8r2 was open and the replace was successful.fabricio lima
MITSUBISHICT-14MS1LM
Image reverting back to dark screen after turning up the brightness in the menu.R563 rusted open.Replaced r563 = 220k.shagster
MITSUBISHITC 1410
The red standby light turns on, pressing the power key turns off the LED and does nothing, it doesn't oscillate.Open 6r8 3w resistor r571 and cap c567 in bad line pin 9 of the flyback
MITSUBISHITC-2018PS
Saturated image, no soundDefective 7809 regulatorComponent replacement.NiloTech