Search: MITSUBISHI
Results: 1346

MITSUBISHI Repair Guide: Common Issues and Fixes

Brand Model Fault Detailed Problem Solution By
MITSUBISHITC - 2090
Locked channel does not change channels or tuneThe defect was the 10k ceramic capacitor c-716.
MITSUBISHITC-2899A
Goes out after 5 to 10 minutes of operation.C-226 of 10k
MITSUBISHITC-1430A
Vertically rolled up and downC-517 of 470µfx16volts open. and open shock l-605.
MITSUBISHITC-20T51
Tuning does not workQ-206 shorted
MITSUBISHITC-14T51
Only get channel 2Ic-1002 24c02 memory
MITSUBISHITC-2041S
Sometimes it doesn't turn onR916 (150k)
MITSUBISHITC-2020
Low channels disappearing.C7t1 (0,01 µf)
MITSUBISHITC-2001Z
S/horizontal synchronism.R510 (6.8hp)
MITSUBISHITC-20012
Remote control does not work.C7p1 (0,022 µf)
MITSUBISHITC-2001
Inoperative, the red light on the on/off switch only lights upC-7p7 leaky or shorted at the power supply.
MITSUBISHITC-2098/2099
Retraces at the top of the screen.Solution to the defect is in the vertical, change the capacitor c-459 of 100ufx35v defect: vertical closed: replace r459 of 82kΩ, see other vertical electrolytics.
MITSUBISHIMITSUBISHI AS QUE USAM O STRS-67XXX NA FONTE.
Burning 120v zenerOpen power supply 4.7uf electrolytic capacitor, worn out.
MITSUBISHITC-2041S
He has difficulty calling, sometimes he calls, sometimes he doesn't.R-916 (150k) open. change it, it may be open or changed.
MITSUBISHIALGUNS MODELOS
Function lock: in standby activates ch + - when turned on then activates menu to/unlock
MITSUBISHITC-1470 DD
Off, indicator LED does not light up.Q-401 (bf-485) leaking.
MITSUBISHITC - 2030
Rumbling sound, weak image and disappears after a few moments with vertical shrinkage.Q-552 leaking. .
MITSUBISHITC - 2090
Locked channel does not change channels or tune.10k ceramic capacitor c-716
MITSUBISHITC 2030
Becomes negative after some timeThe 10k x 50volt ceramic capacitor c107 (.01µf) was replaced.
MITSUBISHITC-1631
Call whenever you want.Change resistance r-916 or r-915 = 150 kΩ open.
MITSUBISHITC2054
Roasted r555 excess high voltage sometimes cuts the neck of the kinescopeMau contacto na solder do resistor 7a5 6k8 x 3w (solder)