PHILCO TV Repair: Common Faults and Solutions.
Search: PHILCO
Results: 4741
Results: 4741
PHILCO Repair Guide: Common Issues and Fixes
Brand | Model | Fault | Detailed Problem | Solution | By |
---|---|---|---|---|---|
PHILCO | PH21B | Turning off in seconds | R552 changed | MARCONDES LIMA,Jaicós-PI- Brasil | |
PHILCO | PCS 2952 | No video "has sound and characters but no channel image" | Check q 301 and or its aggregates | Master Eletronica | |
PHILCO | PT-2054 | When I plugged it into the socket the LED would light up, I would press the power button and it would take about 5 seconds and the LED would start blinking, setting up protection. | It was the fly-back that was shorted. | And just replace it and go to another TV.... | DIEGO LIMA NOVA TIMBOTEUA |
PHILCO | 29-USP | Closing on one side and with saw teeth | Replace c-402/406 (330pf 2kv) | Ademar / Videira sc | |
PHILCO | PH-21/SS | Vertical only half | Missing voltage -b on the vertical output, change without testing the vd-564 | Ademar / Videira sc | |
PHILCO | TP-1452N | Turns on works a little and turns off | Change the start key, bad contact internally | Ademar / Videira sc | |
PHILCO | TPF-2130 | ATV works but every now and then it turns off by itself. | Replace the photo coupler, capacitors c-701/707/928/922/920/702/918 diode d-905 and transistors q-701/702/706 | Ademar / Videira sc | |
PHILCO | TP-2052N | Oxilates but in secondary the +b hiccups | Change the c-913 and c-915 of the power supply | Ademar / Videira sc | |
PHILCO | TP-2052N | No sound in normal rf in av | Change ci tda-8842/2y | Ademar / Videira sc | |
PHILCO | PH 21C | It beeps but does not vibrate low power supply on +b | Swap q-881 2n-5551 can be used the bf-422 is close to the fly back | Ademar / Videira sc | |
PHILCO | TP-2052N | Does not activate the power supply | Replace o resistor r-101 (4k7) | Ademar / Videira sc | |
PHILCO | PC-1438 | Doesn't start | It only turns on when you touch the test pin to pin 3 of the str-50103, change the resistors r-902 r-903 r-904 | Ademar / Videira sc | |
PHILCO | VARIOS CPH-06 | When it gets hot it turns off | Change without measuring the capacitor c-708 (470pf x 2kv) with leakage | Ademar / Videira sc | |
PHILCO | 1454 / 2054 | Blocked, only works with the control | Enter the unlock menu via the control and when asked for the password, enter factory default 7685, and that's it. | Ademar / Videira sc | |
PHILCO | PCM-2046 | Vertical closed and makes tick, tick, tick | Change resistor (r-723) close to the power supply | Ademar / Videira sc | |
PHILCO | TP-2052N | Oxilates and stops | Replace flyback (ov2094/d1) | Ademar / Videira sc | |
PHILCO | PSC-2976S | Image is waving on the sides | Change c-933 c-944 c-934 to see if the latter is not missing | Ademar / Videira sc | |
PHILCO | PSC | Image is waving on the sides | Change c-933 c-944 c-934 to see if the latter is not missing | Ademar / Videira sc | |
PHILCO | 2956N | Volume increases in 3 stages | Turn off the TV, then press the channel + and - keys on the TV and turn on the TV using the remote control | Ademar / Videira sc | |
PHILCO | TP-2052N | LED flashing and the +b on the secondary varies | Replace o ic-901 (tda-4605-03) c-911 c-913 | Ademar / Videira sc |