PHILCO TV Repair: Common Faults and Solutions.
Search: PHILCO
Results: 4741
Results: 4741
PHILCO Repair Guide: Common Issues and Fixes
Brand | Model | Fault | Detailed Problem | Solution | By |
---|---|---|---|---|---|
PHILCO | PCS-2952 | Vertical thick stripes | Replace 270r resistor connected in parallel with the deflector (r-610) | Ademar / Videira sc | |
PHILCO | PSC-2952 | Does not oxidize, the LED keeps flashing | Saida replace vertical replace (la-7833) d-703 e r-720 | Ademar / Videira sc | |
PHILCO | PCM-2046 | Disarming | Change c-716 r-706 d-706 from the abl line | Ademar / Videira sc | |
PHILCO | TPF-2130 | Vertical closed | Resolder d-702 the same with cold solder | Ademar / Videira sc | |
PHILCO | PH-21 | With sound, without image and blurred tube with various colors | Change vertical output | Ademar / Videira sc | |
PHILCO | PCM-2046 | Image blinking or flickering | Replace diodes d-301 and d-302 | Ademar / Videira sc | |
PHILCO | PH14/21/29 | Does not turn on or turns on and off | Replace o transistor v502 (2sc2383) | Ademar / Videira sc | |
PHILCO | TPF 2130 **** | Rainbow turns on and then turns off. | Ci vertical stv 9302 r708 1r open d702 shorted and c601 100.50 smd shorted | Replace the components and everything is ok. | ELETRÔNICA IDEAL |
PHILCO | PCR-1447 | Turning off after some time | Capacitor c708 de 471 2kv | Replace without measuring | eletrônica reis |
PHILCO | PH29C | Does not turn on, stand-by off, +b = 0 volts, normal primary 215v on the filter. | Switching diode d808 (ru3c) shorted. replace it with equal or equivalent rgp15m-j, by299, by438, byw96e. | TECNOGUEDES | |
PHILCO | TP29C21 | TV turns on, after turning it on for a few seconds the screen showed a picture without drizzle | Vertical exit defect | Replaces the vertical output ci | dinei 1965 |
PHILCO | PH29USP A2 | Only opens the top half of the screen, without image and with retraces | Diode vd564 (-15) | reinaldo almeida | |
PHILCO | PH29 | Dead (ray) | Strw6556 open and photo shorted at output. | Note: fuse ok | Ádrian Chapadão do Céu-Go |
PHILCO | PCS 2950 | Triggers protection before the image appears. | C-731 = 1uf x 160v. | FERNANDO S | |
PHILCO | TV PH 29 US A2 | Vertica only opens from the middle down and with a shutter effect change the q 602 c 2383 and run to the hug | Change q802; transistor c2383 in this one I found but I decided, that's a very good tip | DAVI DE PEIXE -BOI PARA UM DICA PRA VÇS | |
PHILCO | PCM2051 | TV did not oscillate horizontally | Capacitor c704 shorted | I replaced it and it looked great | coruja de morato' |
PHILCO | PH29 | Vertical closed from the middle up and some lines | D 701, it only looks good, don't change it | D701 | Alextecnico |
PHILCO | PH14D | Turns off after about 45 minutes on, LED keeps flashing and the power supply drops to 20 VDC | 100 k resistor r839 at the power supply (precision), the diagram shows 82 k, but if you put this in it doesn't work, I put a common 100k 1w one and it solved the problem. There is no point in testing, you have to replace it directly, if you test it it will be good but it changes in operation | EDGAR THIZ | |
PHILCO | PCM 2044 CPH 05 | A bright stripe on the left side of the screen in a horizontal direction. | Driver horizontal q702 2sd 1292 | Do not measure replace | josé |
PHILCO | PCM 2044 CPH 05 | A bright stripe on the left side of the screen in a horizontal direction. | Q 702 note: do not measure change | josé |