PHILIPS TV Repair: Common Faults and Solutions.
Search: PHILIPS
Results: 14169
Results: 14169
PHILIPS Repair Guide: Common Issues and Fixes
Brand | Model | Fault | Detailed Problem | Solution | By |
---|---|---|---|---|---|
PHILIPS | 20PT222 | Turns off after a few minutes. closing the image from left to right | Chap. ceramic c5445 22k located near the trans. horizontal exit | Perse | |
PHILIPS | 20PT4331/78R | Tv with black stripe at the top of the screen | Cap 10mf 250 v | Perse | |
PHILIPS | 21PT5433 | Vertical closed at the top | Cap 2460 82n | Perse | |
PHILIPS | 21PT9467 | Darkening the image turning bluish | Q09 | Perse | |
PHILIPS | 21PT9467C | Total stop | Voltage fluctuation | The input fuse was found open, the ic 601 (str-w6554a) shorted, the diode d610 (ba 158), shorted which was replaced by by 226, the electrolytic capacitor c315 (1000/25), was damaged. Soon replaced by a 1000/35, but even so the TV didn't work, the power supply capacitor continued to accumulate voltage, with further research I found the resistor r 603 (220r) open when replacing the TV and it started working normally again | Rivaldo Lira |
PHILIPS | 32PW9713/12 S 6AMD2.220 AA | Turns on, tries to start, and turns off, LED starts flashing | Trans. 7470 (irf620 = buz90) shorted | joaquim cunha | |
PHILIPS | 21PT5437 | Dark screen with characters without video and normal sound | Open 100k r3442 | Replace | EletroClaudio Aguas Belas Pe |
PHILIPS | 21PT5435 | Normal voltage, LED on, but inoperative | Capacitor de horizontal 10x16 c-2455 | Replaced cable. | RAIO INFOSERVICE |
PHILIPS | 14PT414A | When changing channels or changing scenes, the vertical shows open lines and deformation | Capacitor c2409 de 47ufx160v - replace | Rubens | |
PHILIPS | 29GX1895 ANUBIS | Weak image, like bad tube | R 3460 18k open | ramiresrc | |
PHILIPS | 14PT3131/78R | Inoperative (power supply changed at all power supplys) | Ci7515 | Replace the same | Jarbas Santos (eletro-serv) |
PHILIPS | 21PT6456/78 - OU PT3336-PT3131-PT4131-PT3331-PT4331-PT5435 | Enter service mode @@@ | TV turned on with the remote control press the following keys in the sequence 062596 and the menu will appear on the screen the mode is used to make the adjustments and to finish press OSD and PAWER on the control ok your TV is programmed | Help yourself, leave your tip ass.arni | ELETRONICA ARNI-LEOBERTO LEAL-SC |
PHILIPS | 14GL 1314 | High power supply (110v) | I detected the fet transistor in short. I changed it and the power supply was changed | I replaced the 3342 resistor (8k2) and the power supply returned to normal (70v) | This email address is being protected from spambots. You need JavaScript enabled to view it. |
PHILIPS | 14PT3131 | Inoperative power supply accumulating current. | 3k3 1w resistor r9520 and the ic7520 tea1506t shorted. | Replace | ELETROCLAUDIO DE AGUAS BELAS PE |
PHILIPS | 21PT9467C | Vertical closed | Check: r 09, 10, 318 - d 303, 304, 305 and vertical side. | tyko | |
PHILIPS | 21PT232A L7PLUS | Does not turn on, just stays on standby | But b normal, but it didn't release the 8v, | Smd ceramic capacitor c2422, with a cracked solder on one side, it was just a matter of re-soldering and the TV returned to normal. | acms20 |
PHILIPS | 21 GX 1666 ANUBIS | Does not turn on, just stays on standby | Keyboard locked | Open or altered resistor r3561 next to the 13 volt power supply capacitor | itan ( cabeça) |
PHILIPS | 20GX1658 ANUBIS | Does not tune the channels, er 04 appears on the screen | R 3452 of 47r open | ramiresrc | |
PHILIPS | 29PT4643/78 | Turning off within a few seconds of switching on and perfect image giving error code 11 | Broken kinescope | Replace the kinescope | samuel leite |
PHILIPS | 14PT4131 | Dark screen | Change 150k r3442 | Evandro Estrela |