PHILIPS TV Repair: Common Faults and Solutions.
Search: PHILIPS
Results: 14170
Results: 14170
PHILIPS Repair Guide: Common Issues and Fixes
| Brand | Model | Fault | Detailed Problem | Solution | By |
|---|---|---|---|---|---|
| PHILIPS | 21PT534 | Weak image with reduced frame | Convert to eprom memory | Eletroclaudio Aguas Belas PE | |
| PHILIPS | 21PT5432 L01.1LAC | No audio and video, normal OSD. | Smd ceramic capacitor in position 2203. | This email address is being protected from spambots. You need JavaScript enabled to view it. | |
| PHILIPS | 21PT5433 | Time turns on with image time keeps clicking with the green screen with retrace lines turns off oscillating and cutting the image | It was the kinescope socket | Replace | Eletroclaudio Aguas Belas PE |
| PHILIPS | 20GL1343/78Z | White lines at the top and slowly opening image in vertical | Capacitor de 100uf | Replace, ok! | EDUARDO PIRAPETINGA |
| PHILIPS | 14PT112 L7 | It doesn't have 5 volts | Shorted remote receiver | matieski | |
| PHILIPS | 14PT112 L7 | Red missing | R3312 open | Replace resistor | matieski |
| PHILIPS | FWC270/19 | Everything works but tsound is no audio | Fet 7302 altered and with little thermal paste | Replacing the fet 7302 with + thermal paste (stp16ne06) can be replaced by (stp20nf06 - id20a) or buk7535-55a. | Burani |
| PHILIPS | 29PT552A | Does not turn on, low power supply and pulsating | C2560 shorted | Replace | paulo maceio-al |
| PHILIPS | 20PT122A/78R | Does not turn on, standby LED blinks | Horizontal output, vertical output and flayback, all shorted. | Replace them. | ADRIANO |
| PHILIPS | 29PT8457/78 L04 - L07 | When turning it off at the main switch or the socket it took a while to turn it back on, it took longer and longer over time. Then he stopped calling anymore. | Capacitor smd da power supply, 2532 - 10mf | 2532 capacitor replaced | Trevisan |
| PHILIPS | 29PT552/78R | Turns on stand by then turns off | Transistor 7481 (c557b) | Replaced | luciano caxias |
| PHILIPS | 20PT428A 000 | Burning transistor horizontal exit fransuar 88178817 | Replace flayback with internal escape | Transistor replaced + flyback | marcos melo cascavel ceara |
| PHILIPS | 20PT428 | Lighter band in the horizontal direction with hiss or noise at the power supply | R 3547 (0.33r) in the power supply changed | NV ELETRONICA | |
| PHILIPS | 29GX1899 | Vertical line | At TDA 8351 5y | Solution to replace the ci, details I couldn't find in Rio de Janeiro wsound I live, the solution was to put another ci tda 8351 final 6 you can trust and replace the ci tda 8351 final 5y it's increasingly difficult to find material in the square, you liked the tip, pass it on to others too, thanks technical friends God help you | fernandoferreira |
| PHILIPS | 14PT113 | LED flashing with the speaker making a heart beating noise | Capacitor c2447 shorted | Replace | Eletroclaudio Aguas Belas PE |
| PHILIPS | DVP-3040K/78 | Nothing works, display doesn't light up, only with stand-by on it doesn't turn on | Switch sw k301 on and off | Replace contact switch on and off | PALAURO |
| PHILIPS | 20GL1049 | Flyback at2079/b9 burst | Replace flyback | Jaison | |
| PHILIPS | 29PT5642/78 L04U | Vertical with 3 lines | Bas 316 diode replacement | Don't put in4148 doesn't work, replace with another stronger diode | bill |
| PHILIPS | 21PT | The image does not appear on uhf channels, only on vhf | Replace the varicap for another original one | Replace the varicap for another original | rafael pantoja ig-miri |
| PHILIPS | 20PT120B L7VA | The LED comes on and it keeps flashing and the TV doesn't work | Change c2448 and 2551 both 47/160v | CHARLES CIPRIANO |