PHILIPS TV Repair: Common Faults and Solutions.
Search: PHILIPS
Results: 14171
Results: 14171
PHILIPS Repair Guide: Common Issues and Fixes
| Brand | Model | Fault | Detailed Problem | Solution | By |
|---|---|---|---|---|---|
| PHILIPS | CH GR1-AX | Horiz impulses appear. starting but then it doesn't keep | Ic 7020 tda8305a | ||
| PHILIPS | CP90 | Does not have a display | Pot. 3896 of 4.7k. goes to pin 13 of the upc | ||
| PHILIPS | CHASSIS L6.1 | Power supply with usual components all shorted | R3508 6k8 with intermittent interruptions | ||
| PHILIPS | 28PW6408/01 | Image very open horizontally, without control with mode service. | Replacement of transistor 7406 - ktc2800. | ||
| PHILIPS | 28PW6322/11 CHASSIS MD1.2E AA | Image with excessive width and e/w distortion. switches to stby after a few minutes. | Welding on coil 5424 at the junction with c2432. it may damage the mos-fet 7480 mtp3055e. | ||
| PHILIPS | 36PW6322/11 CH. MD1.2EAA | When turned off on command, the sound is lost but the image remains. | R3588 3r3 in the supply, to the cathode of d6590 | ||
| PHILIPS | 28PW9623/12 CHASSIS MD2.25AA | Does not turn on, stays on standby | C2418 toasted, replaced, led blinks, +b voltage is already tsound but drops to around 15vts, see: tr7470+7421, t.s.l hr8225 = eldor 1302.0007, finally another tr7408 bsn304 = bsn274, applied a buz90a and it is solved | ||
| PHILIPS | 21PV267/08 | Image shifted sideways | Substituir c2584 0.68-250v | ||
| PHILIPS | 14PT1556 CHASSIS L01.2E | It only tunes to VHF, without sound, the balance control appears and the TV is mono. It also gave error 4 (sound) | Turner and eprom reprogramming, as it was corrupted after turning it off/on | ||
| PHILIPS | 28ML8805/19B FL1.6 | After some time of work, the tda3654q and res. r3535 e3536 breakdown | Change transformer s.l. hr6538 | ||
| PHILIPS | 28ST2477/10B CHASSI GR2.2 AA | Excessive width | C2559 100µf/25v spilled electrolyte corroding the printed circuit under it. pay attention to all the black "nichicon" electrolytic capacitors on the fi module and on the main board, with a tendency to spill the electrolyte. | ||
| PHILIPS | 21CE4556/10Z CHASSIS 2B | When the volume increased, oscillations appeared in the image | D6705. note: the 140v voltage did not adjust when it was 148v +/- | ||
| PHILIPS | 21PT1664 CHASSI L9.2 | Power supply working low | Sub t7400 = bf422 | ||
| PHILIPS | 21PT522A CHASSI GR 2.2 | No light. with sound | Sub t7370 = bc848 | ||
| PHILIPS | 14PT1353/00 CHASSIS L6.1 | Does not turn on or light up | 6506 rectifier bridge S1NB60, 7504 power supply transistor STP5NB40FP, 6514 Zener BZT03C130, 6502 Zener BZX55C15, R 3514/3515 both 1Ω. | ||
| PHILIPS | CHASSIS GR1AX | Does not work 1.3 on the 95v line protection activated | After removing the protective thyristor, tsound was 99v on the 95v line, which is why the protection was activated. replace r3629 instead of 33k it had 43k, high power supply | ||
| PHILIPS | 21PT166B CHASSIS AA5 | No horizontal deflection, just a vertical line in the center of the screen. | 680nf 250v c2450 replacement. | ||
| PHILIPS | GR1-AX | With about 8 volts instead of 95 on the tht supply | 2527 10nf capacitor with leakage, measured with anΩmeter it appeared to be around 500Ω | ||
| PHILIPS | 14PT1532 CHASSI 6.1 | Narrow vertical and folded top | Fault c 2404 10n with leak | ||
| PHILIPS | CH ANUBIS A | Power supply has "+95" with 100v but horiz. does not start | Resist. 3444 5k6 2w >> 3w |