PHILIPS TV Repair: Common Faults and Solutions.
Search: PHILIPS
Results: 14171
Results: 14171
PHILIPS Repair Guide: Common Issues and Fixes
Brand | Model | Fault | Detailed Problem | Solution | By |
---|---|---|---|---|---|
PHILIPS | 25PT4523 MD1.2E AA | W/ sound. no image | T7106 bc858 | ||
PHILIPS | GR2.2 | "s" appears in yellow on the screen. the install key does not call the menu, when you press it it starts an automatic search. inhibit entry into service mode. | The information "s" means that pins m33 and m34 are shunted, when in reality they weren't even, the solution to this problem is to replace the corrupted eeprom memory | ||
PHILIPS | 29GX1898 | Turns on directly with drizzle and without OSD, controls stuck | C2428 with leak. | ||
PHILIPS | 14GL1015 | Stop. wsound tsound should be 70v tsound is only 9v. | Bf423 position 7345, replace without measuring. | ||
PHILIPS | 21PT8467 /78 L03.1L | Vertical closed | R3445 of 1r | ||
PHILIPS | 107ET3 | Dark image | R715 open | ||
PHILIPS | 29PT5642 /78 - CHASSIS L04 | Doesn't turn on sometimes | D6512 ->bat54 col (smd) | ||
PHILIPS | 21PT6456 | With osd without image | R3442 de 100k | ||
PHILIPS | 20PT3336 | With osd without image | R3442 de 100k | ||
PHILIPS | 20PT122 | Does not receive any channels just drizzle | Enter service mode by grounding the eeprom pin then set al to 0 or 1, if it has 0 put 1 vice versa | ||
SOM PHILIPS | FWC-270 | No sound at 110v, at 220v normal | Fet 7302. | ||
PHILIPS | 29GX1898/78 | Turns off after a few hours on. Sometimes it doesn't want to turn on and when measured, the circuit turns on by itself just like that | See all chap. power supply electrolytics, they are the blue ones, also check c2516. | ||
PHILIPS | 20CN4362 NCF | Sem vertical | Raadid a, right | jose almeida tavares | |
PHILIPS | 29PT4635 | Horizontal does not open fully, return lines | Check transistors 7461=bc337 7463=bc327 and 2455=47mfx25v | ||
PHILIPS | 29PT4631 25PT5531 29PT4640 L01.1L AC | Turn on and off | Check welding in the horizontal circuit. check 7461=bc337 7463=bc327 and 2455=47mfx25v | ||
PHILIPS | 20CN4465: AO LIGAR APARECE A INDICAçãO F1 NO DISPLAY. | When switching on, the indication f1 appears on the display. | Check inside the remote control sensor shield and replace the c-093- 100mf capacitor. Don't forget to replace the shield. | ||
PHILIPS | 14GL1314 | Black screen with white stripes flashing no image and no audio | R3963 10k aberto. | ||
PHILIPS | 14GL1014 | Kills tension +b | Zd 6737 shorted. | ||
PHILIPS | 14GL1314 | Does not tune channels | R3958 18k aberto. | ||
PHILIPS | 20PT3336 | Vertical closed 5 seconds line peaks and turns off | R3448 open |