PHILIPS TV Repair: Common Faults and Solutions.
Search: PHILIPS
Results: 14174
Results: 14174
PHILIPS Repair Guide: Common Issues and Fixes
Brand | Model | Fault | Detailed Problem | Solution | By |
---|---|---|---|---|---|
PHILIPS | 14GL1015 | Low power supply less than 40v | Flyback shorted between pins 9 and 10 | ELETRÔNICA GOMES | |
PHILIPS | 14GL1015 | When you tune in, it's black and white or changing the channel has interference | Broken channel processor | ELETRÔNICA GOMES | |
PHILIPS | 14GLK1015 | Dead, supply low less than 40 v, | Short flyback, pins 9 and 10 | ELETRÔNICA GOMES | |
PHILIPS | 20GX1659 GR6-AL | The TV has sound but no image, when you open the screen, it gives you a dark, speckled screen (the stand-by LED flashes four times) | Saida vertical tda8356 | Replace tda8356 | Eletronica Som & Imagem |
PHILIPS | 14PT | TV doesn't tune the channel or the pal. I even changed the selector but it didn't solve the problem. | On the third and fourth pin of the seletronic there is each one a resistance (smd 101) that is 100Ω. | heliomar | |
PHILIPS | 20PT | TV doesn't tune the channel or the pal. I even changed the selector but it didn't solve the problem. | On the third and fourth pin of the seletronic there is each one a resistance (smd 101) that is 100Ω. | heliomar | |
PHILIPS | 21PT5433 | TV doesn't tune the channel or the pal. I even changed the selector but it didn't solve the problem. | On the third and fourth pin of the seletronic there is each one a resistance (smd 101) that is 100Ω. | heliomar | |
PHILIPS | 21PT5433 | Without image but with sound and menu characters | When turning on this TV, it came with no image but with sound and tuning. The screen was completely dark, the menu characters acted and were visible on the screen but the channel image was missing. | 100k resistor 3442 fully open, it works close to the flayback but precisely on pin 10 of it | This email address is being protected from spambots. You need JavaScript enabled to view it. |
PHILIPS | 20MT2131 | TV with vertical closed at the bottom and no sound | Main cause is the 24c16wp eprom memory, there is no point in adding another 24c16 type, it has to be the same as the 24c16wp | It was replaced and the TV was broken, as a precaution, also replace the capacitors that are close to the flayback, those of 470mfx16v or 10mfx160v, 47mfx50v, 47mfx16v | This email address is being protected from spambots. You need JavaScript enabled to view it. |
PHILIPS | 20PT3336 | TV with vertical closed at the bottom and no sound | Main cause is the 24c16wp eprom memory, there is no point in adding another 24c16 type, it has to be the same as the 24c16wp | It was replaced and the TV was broken, as a precaution, also replace the capacitors that are close to the flayback, the 470mfx16v or 10mfx160v, 47mfx50v, 47mfx16v | This email address is being protected from spambots. You need JavaScript enabled to view it. |
PHILIPS | 20PT3333 | TV with vertical closed at the bottom and no sound | Main cause is the 24c16wp eprom memory, there is no point in adding another 24c16 type, it has to be the same as the 24c16wp | It was replaced and the TV was broken, as a precaution, also replace the capacitors that are close to the flayback, the 470mfx16v or 10mfx160v, 47mfx50v, 47mfx16v | This email address is being protected from spambots. You need JavaScript enabled to view it. |
PHILIPS | 20PT3331 | TV with vertical closed at the bottom and no sound | Main cause is the 24c16wp eprom memory, there is no point in adding another 24c16 type, it has to be the same as the 24c16wp | It was replaced and the TV was broken, as a precaution, also replace the capacitors that are close to the flayback, the 470mfx16v or 10mfx160v, 47mfx50v, 47mfx16v | This email address is being protected from spambots. You need JavaScript enabled to view it. |
PHILIPS | 20PT3336 | Does not turn on, +b 103v ok, when it turns on it only gives a small pulse on the fly and stops, (can be observed with a neon lamp) | R3445 of 1r/1w changed, or check all fly secondary street. | Bruske | |
PHILIPS | 20GX1656 | Image with ripple and power supply fet heats up excessively. | Replace ic 7520 (uc 3842bn) | Persio(TVCOMPANY) | |
PHILIPS | 14PT110 | Inoperative without any power supply | 6540 diode track open on cabinet support | ANTONIO NOBREGA [PATOS.PB] | |
PHILIPS | 29PT5645 | Does not turn on or turn on stand-by | Fotoaclopador et1103 | Replace photo coupler ET1103 | Eletronica Som & Imagem |
PHILIPS | 20PT326A | LED blinks once and turns off | Check driver transistor | ||
PHILIPS | 20PT326A | LED flashes 4 times does not turn on | Transistor 7608 smd | ||
PHILIPS | 29PT5642 | Vertical with lines at the top (when alloy comes with 3 lines at the top) | Check c2465 10mf/160v | Badri | |
PHILIPS | 21PT5433 | Bu \ warms up turns off | C 2455 | Ok | ROBERTO |