PHILIPS TV Repair: Common Faults and Solutions.
Search: PHILIPS
Results: 14174
Results: 14174
PHILIPS Repair Guide: Common Issues and Fixes
| Brand | Model | Fault | Detailed Problem | Solution | By |
|---|---|---|---|---|---|
| PHILIPS | 20PT324A | Volume worked, but the sound only sounded after number 37 on the volume indicator. | I changed the sound output, problem solved. | Leônidas (Léo) | |
| PHILIPS | 20PT123A | Inoperative, power supply in protection mode stand by led blinks faintly. | Capacitor 2447 next to the horizontal output transistor short circuited, be careful when this capacitor is short circuited, do not turn on the television without a horizontal load as this may cause damage to the yoke (deflector) | Replace the capacitor and observe the 1k 3454 resistor in parallel with the yoke (deflector) | WAGGUINHO |
| PHILIPS | 29PT552A | Inoperative, power supply completely stopped, no voltage at the outputs. | Capacitor c2550 (331x1kv) short circuited. | Replace the defective component and the device returned to normal operation. If the device keeps turning off in faster times, replace the diode in parallel with the one mentioned and replace the capacitor with one of 471x2kv as this improves the diode's dissipation. | WAGGUINHO |
| PHILIPS | L6.1 14PT1353 L6.1 | Stand by LED lights up, does not start | Diode 6420, also check vertical 7401, 7402 | spda | |
| PHILIPS | 21PT5433 | When connecting with colored lines and then with retraction - c2460 polyester, c2465 electrolytic vertical | C2460 replaced, depending on the symptom state replaces | http://rmeletronica.com.br | |
| PHILIPS | PT314/78 | Turns on only when it drizzles and turns off in 5 seconds | Tuner | matieski | |
| PHILIPS | 21PT5435 78R | Dead | Contacts in the 1822 connector shorted (torn with damage to the tracks | Reconnected and replaced r 3448 (1Ω) device started working again | miguelito |
| PHILIPS | 42PF7320 PLASMA | The device turns on and then enters protection mode. | Open or short-circuited speakers or the output c.i. is faulty | Disconnect the audio amplifier connectors then turn on the device, it should work, check the speakers, if they are open or short circuited or altered, replace them with original ones checking the characteristics, if the speakers are normal, replace the c.i amplifier. | WAGGUINHO |
| PHILIPS | 29PT4631/78 | When turned on, normal image, however it turned off after 30 seconds. | Transistor 7461- bc337 with low gain | As a complement, check voltage and capacitance of c 2561 (100mf 160v), replacing if necessary. | OLIBIO ESTUDIER |
| PHILIPS | 20PT324 | Image shifted to the right with a dark bar on the left side | Resistor 3404 | ||
| PHILIPS | 29PT4631 | Image folded on the right side | C2455 | ||
| PHILIPS | 20GL1045 | High power supply | R3348 amended | ||
| PHILIPS | 20PT3331 | Vertical with 3 colored stripes | C2460 | ||
| PHILIPS | 20PT424 | With sound, without image | R3404(12k) and q7610(bc847) open | ||
| PHILIPS -SOM | FW-M912 | Returns to stand by only with red LED on | R3128, c2112 | ||
| PHILIPS | 21PT6456 | Vertical closed at the top with return lines | C2460 | ||
| PHILIPS | 21PT5435 | Normal audio, normal osd, dark background | R3442 open | ||
| PHILIPS | 21PT5433 | Vertical closed at the bottom | Check eprom data, replace, service mode 0-6-2-5-9-6 | ||
| PHILIPS | 29PT2631/78 NAO LEMBRO | When I turned it on, the image was distorted on the horizontal output. | Changing the ex 2455 power supply capacitors and so on | andre | |
| PHILIPS | DVP3005 | So fica em stand by | Resolved from flech memory | ALAN |