PHILIPS TV Repair: Common Faults and Solutions.
Search: PHILIPS
Results: 14174
Results: 14174
PHILIPS Repair Guide: Common Issues and Fixes
| Brand | Model | Fault | Detailed Problem | Solution | By |
|---|---|---|---|---|---|
| PHILIPS | 20NC4067 | Doesn't tune into any channel, it just drizzles | R587 18k open or zener diode 30v d002 shorted | João Victor | |
| PHILIPS | 14PT112A/78R | Dead | Tsh short. | After replacing the tsh, the TV worked but did not tune. I found a cold solder on the varicap's 8vot line. | Tecvideo |
| PHILIPS | 29PT5642 | Doesn't start | Optical coupler replacement (pc817) | ||
| PHILIPS | FWC 270 | Display off | D259 shorted. | Carlão | |
| PHILIPS | 21PT2663 L7.2E | Turns on and after a few seconds returns to standby | C2443 without circuit capacity + 13v def. vertical | Raimber | |
| PHILIPS | 20PT529A | N works 220 | Defective 6523 diode | Replace or even replacement with another 200v | markinho brasil |
| PHILIPS | 20PT259A L01.2L AB-2K2 | Working perfectly, suddenly, there is no video and lines of retraces accompanied by a rumble in the audio and then it turns off. | Ic 7901 (an 7522n) with faults, after the replacement the TV worked perfectly. | Léo, Natal-RN | |
| PHILIPS | 14GL1314 | Tuning was lost (image with drizzle was black and white) and the sound was buzzing | Looking for poorly welded parts, when pressing the tuner the chassis would bend and the image was good | I resoldered the parts in the region where the chassis tilted the most (defect resolved) | JOSE CLAUDIO |
| TVC PHILIPS | 20PT324A/78R | Device on standby starts but when turned on the apparently blurred tube returns to standbay | 1k resistor r2343 on open tube plate | This email address is being protected from spambots. You need JavaScript enabled to view it. | |
| PHILIPS | 20PT3331 | Disarming or turning off | Scrim | Adjust scrim by pressing volume | This email address is being protected from spambots. You need JavaScript enabled to view it. |
| PHILIPS | 20GL1045 GR1-VA | Warming up the buk444 | Buk444 burning | Resistor (3321) replaced | Gilberto Antonio |
| PHILIPS | 20GL1049 | Doesn't start | Fly back replacement | Helderson | |
| PHILIPS | 21PT5432/78R | Turning off and no image | I changed the tube socket which was oxidized and went into service mode and changed the akb from 0 to 1 and remade the settings on the screen and everything was normal. | gigante | |
| PHILIPS | 21PT5435 L03.1L | TV turning off, with spark in the focus (socket spark) | Enter service mode. change akb value from 0 to 1. and everything is normal. | PATRIARCA | |
| PHILIPS | 29PT4643/78 | Does not turn on, 7504 burnt out | It arrived with the 7504 burned out, I replaced it but the TV wouldn't turn on, it just lit up the LED, I checked the power supply items like 2532- 3513 - 3514- 6514- 6533- 6534- 6535- 6536- 6572- 7512- 7513- 7514- 7531 and it only worked after replacement of 7511 (tea1506) smd. | juzemar | |
| RADIOLA-PHILIPS | 56KV1508 GR1AX | It has a power supply (95v and 9v), but it doesn't start but if we apply 12v to pin 7 of the IC 7020, it works without problems | See diode 6523 1n4148, it is open, also change c2636 (9v) | piratadoar | |
| PHILIPS | 21PT5433/78R | TV turns off next 5 seconds | Change capacitor 2455 or transistor 7440 good luck | Rovanie | |
| PHILIPS | 20PT4331 | No sound and vertical closed bottom | Replace o eprom | Scorpion | |
| PHILIPS | 21PT6456 | Power supply crying and liver vestibule, | 1r 3446 resistor that makes 12v | francisco saldanha | |
| PHILIPS | 20PT222A - L7L L7L | Turns off after a few minutes without error | Screen adjustment | To adjust the screen 1- service mode 062596 + menu, item akb, replace to option 1; 2- put the TV on AV, adjust the screen potentiometer until there are no return lines; 3- set the abk option back to 0 | Joaquim Andrade |