PHILIPS TV Repair: Common Faults and Solutions.
Search: PHILIPS
Results: 14169
Results: 14169
PHILIPS Repair Guide: Common Issues and Fixes
Brand | Model | Fault | Detailed Problem | Solution | By |
---|---|---|---|---|---|
PHILIPS | GR6-AL | Intermittently loses tune or (loop). | Check programming table. * 03mar97 anc *. If it is ok in pal n/ntsc see comb panel regulator filter. * 21Aug97 jpba *. check on transistor 7280. * 16out97 jpba *. ic7345, b | ||
PHILIPS | GR6-AL | No colors | If it occurs on just one or a few channels, enter the menu (paln/m/ntsc system) check may be configured to ntsc. * 20Aug97 jpba *. | ||
PHILIPS | GR6-AL | There is no contrast | Check capacitor 2573 and diode 6571. * 16out97 jpba *. | ||
PHILIPS | GR6-AL | It doesn't work (it stays off). | Check integrated 7400. * 15set97 ctr *. t7501 (h.driver). *17Sep98 sp443* | ||
PHILIPS | GR6-AL | No characters/menu appear. | Verificar capacitor 2252 e 2250. * 16abr98 sp532 *. r3367 alterado (pino 30 microp). *31ago98 mg335* | ||
PHILIPS | GR6-AL | Horizontal lines (bottom or top). | Try to change address 49=12. * 16oct97 jpba *. check capacitors 2584 (1µf) and 2587 (1000µf). * 16Jul99 acm *. | ||
PHILIPS | GR6-AL | LED(s) flashing. (repeatedly) | Dark screen, when turned off, the screen lights up: check 7346 (24c04). * 03mar97 anc *. blinks 2 times and does not work, check transistor 7500 (driver), and resistor 3537 (2k7) open. * 16oct97 jpba *. flashes 6 times and does not work, check | ||
PHILIPS | GR6-AL | Dos/menu - with changed characters. | R3367 alterado (pino 30 do microp). *31ago98 mg335* | ||
PHILIPS | GR6-AL | Turns off immediately after turning on. | Verificar capacitor 2503 (10nf). * 16jul99 acm *. | ||
PHILIPS | GR6-AL | Turn off inter. or protect (rew 3 for vcr). | Check integrated 7400. * 15set97 ctr *. c2411 with leak. *18Sep98 CP160* check resistor 3419 (10r). * 16Jul99 acm *. | ||
PHILIPS | GR6-AL | Image delay when changing channels or when turning on. | Check kinescope. * 18Sep97 ctr *. | ||
PHILIPS | GR6-AL | It beeps loudly (power supply), but it doesn't work. | Verifciar capacitor 2503 (10nf). * 16jul99 acm *. | ||
PHILIPS | GR6 LS | Return lines (retraction). | C 2587 +16v elco. the screen goes dark with lap portraits laughs. * 04Aug98 sp602 * | ||
PHILIPS | GR6 LS | Interference in the image | Check regulator 7905 (5v) on the comb filter panel. * 25jun97 jpba *. | ||
PHILIPS | GR1-VA | Vertical flutter | Capacitor 2415 (100nf) aberto. * 07nov95 anc *. resistor 3415 (220e) aberto. * 17jul96 anc *. | ||
PHILIPS | GR1-VA | Vertical closing intermittent. | Check open capacitor 2415 (100nf). * 07nov95 anc *. check track below jump 9415. * 15may96 anc *. check resistor 3415 (220e). * 17Jul96 BC *. possibility of failure in the 6410 diode. * 25jul96 anc *. | ||
PHILIPS | GR1-VA | Vertical with little amplitude | Check resistor 3426, 3417 and 3418 may have one of them changed. * 25Jul96 BC *. see resistor 3229 (1m) changed. * 30Jul96 jpba *. | ||
PHILIPS | GR1-VA | Voltages above specified | Resistor 3342 (18k). * 02out96 jpba *. resistor 3348 (11k) alterado. * 06dez96 irhd *. | ||
PHILIPS | GR1-VA | Voltages below the specified (vo, +b,..) | Vo (92v) low, see 5505 with leakage. *out 95 ctr*. all fly back output voltages, see graph 5505 code. 4806 148 87014, the code is wrong in the manual. * 25Jul96 BC *. +70v= see changed resistor 3341. * 30Jul96 jpba *. +70v= see: 6345, | ||
PHILIPS | GR1-VA | Cyan screen (no red) = red1 | 3722 resistor open. * 04Jul96 jpba *. resistor 3276 (1k) open. * 23jan98 jpba *. |