PHILIPS TV Repair: Common Faults and Solutions.


AIWA
BEKO
CCE
CINERAL
DAEWOO
FUNAI
GRADIENTE
GRUNDIG
HISENSE
HITACHI
ITT
JVC
LG
MITSUBISHI
PANASONIC
PHILCO
PHILIPS
PIONEER
RCA
SAMSUNG
SANYO
SHARP
SONY
THOMSON
TOSHIBA
VESTEL


Search: PHILIPS
Results: 14168

PHILIPS Repair Guide: Common Issues and Fixes

Brand Model Fault Detailed Problem Solution By
PHILIPS53TP60C
Intermittent sound (crashes, hiccups).Check +14v track below b61 (dig comb ground filter). *22Aug97 anc*.
PHILIPS53TP60C
Low sound.Check disc l201 coil adjustment. * 25Aug97 anc *.
PHILIPS53TP60C
Tuner with little gainVerificar capacitor c211 smd 0,47µf (fuga). * 25ago97 anc *
PHILIPS53TP60C
No sound. (with or without image for TV, VCR).Check j620 cable. * 15may96 ac *. possible lack of activation in the menu. how to proceed: press <m> in control select advanced controls <m> select tv speakers on/off <m>. * 21nov96 anc *. follow previous procedure and call center
PHILIPS53TP60C
No horizontal oscillator pulse.Measure pin 8 of IC900, if it is above 4.5v, there is possibility of being triggered by "h&v deflection failsafe" (q501), check integrated ic550. *22ago97 anc*. Check for possible leaks in Q500 and Q502. * 27Aug97 *. see with oscilosc
PHILIPS53TP60C
No vertical linearity.Check possible short in d812 (ph181), in this case the 9v power supply becomes high. *20Aug97 anc*. possibility of integrated IC600 (TA8850N). *25Aug97 anc*
PHILIPS53TP60C
No focus.Check the TRC fluid level, perform adjustments mechanical and electrical. *22Aug97 anc*. Check cables connected to the focus combo. *22Aug97 anc*. possibility of integrated IC600 (TA8850N), frame expands exaggerated, making it unfocused. *
PHILIPS53TP60C
No colors only in palmAdjustment and welding of the crystal 3.579545 mhz. * 21nov96 anc *.
PHILIPS53TP60C
No colors in ntscCheck resistor r817 (1Û) open. * 16Sep97 anc *.
PHILIPS53TP60C
Loud noise (air leak).Check grounding cable j540 of the "trcs" panels, this must be connected below the capacitor c930, side bottom left of the main board. * 03Apr97 anc *.
PHILIPS53TP60C
Convex frame ) (.Check capacitor c820 (4.7µf/10v) open, see also c450 (10µf/50v). * 15Oct97 anc *.
PHILIPS53TP60C
Concave framework ( ).Verificar capacitor c453 (3,3nf). * 15out97 anc *.
PHILIPS53TP60C
Frame sparkling with expanding "bloom".Check capacitor c907 smd (0.015) cracked. * 10jan97 anc*. adjust r551, if frame decreases, check integrated IC600 (TA8850N). * 25Aug97 anc *.
PHILIPS53TP60C
Searches but cannot find (barr3/sint3).Check adjustment of coil l202 (see page 4 of the manual). * 18Sep97 anc *.
PHILIPS53TP60C
Point on the screen (any color)Yellow point, failure in the deflection circuit, causing burns in the blue cannon. *20Aug96 anc*
PHILIPS53TP60C
Does not hold memory (loses information).Loses information on convergence data, check integrated IC11 (x24co8p). * 11Apr96 BC *.
PHILIPS53TP60C
Does not leave the service position.Check integrated ic11 of the convergence panel. * 10jan97 anc *.
PHILIPS53TP60C
It doesn't work (it stays off).Check that there is no short on +12v, see ic400. * 15may96 anc check f402 (5a) +b open. * 15Aug96 BC *. check the power on line of the ic301, it should vary from 5v to 0v on pin 11 when turned on on the panel or on on the remote control, case
PHILIPS53TP60C
Does not enter service mode.In convergence mode, check integrated IC12. * 18Sep97 anc*.
PHILIPS53TP60C
No characters/menu appear.Check ic14 on convergence panel, comb panel filter, ic600(yc processor), ic308(character generator), IC301 (microprocessor). * 12Aug99 anc *.