PHILIPS TV Repair: Common Faults and Solutions.


AIWA
BEKO
CCE
CINERAL
DAEWOO
FUNAI
GRADIENTE
GRUNDIG
HISENSE
HITACHI
ITT
JVC
LG
MITSUBISHI
PANASONIC
PHILCO
PHILIPS
PIONEER
RCA
SAMSUNG
SANYO
SHARP
SONY
THOMSON
TOSHIBA
VESTEL


Search: PHILIPS
Results: 14168

PHILIPS Repair Guide: Common Issues and Fixes

Brand Model Fault Detailed Problem Solution By
PHILIPS53TP60C
Does not adjust conv. red (i) "vert. red".Check welding of q306. *22Aug97 anc*. compressed, check resistors r311 and r32 changed to lower value. *22Aug97 anc*.
PHILIPS53TP60C
Does not adjust with. red (-) "hot. red".Horizontal red: check r361 and r362 changed (5.1v). * 04Jul96 ac *. horizontal red, see cold solder q356. * 05nov96 anc *.
PHILIPS53TP60C
Does not adjust conv. green (i) "vert. green".Check welding of q106 and q107. *22Aug97 anc*.
PHILIPS53TP60C
Does not adjust conv. green (-) "hor. green".Check integrated IC110 (N5532). * 18Sep97 anc *.
PHILIPS53TP60C
Does not adjust conv. blue (i) "vert. blue".Check the heatsinks for heat, if very hot possible integrated IC210 (measure pin 3 with 0.6v * 10jan97 anc*. check possible cold welds in q207 and q208. * 22Aug97 anc*.
PHILIPS53TP60C
Does not adjust conv. blue (-) "hor. blue".See possible cold welds on the q257. *22Aug97 anc*.
PHILIPS53TP60C
Does not accept remote commandsCheck integrated ic301 (613029). * 18Sep97 anc *.
PHILIPS53TP60C
Horizontal lines (bottom or top).Check aquadag cable and j540 connector. * 16Aug96 anc *. c554, retraces at the bottom and also in the middle of the screen. *17Sep98 h.desk*
PHILIPS53TP60C
Wave interference, like wood grain.Integrated ic11 (x24c08p), convergence problems. * 11Apr96 anc *.
PHILIPS53TP60C
Interference in the imageCheck capacitor c211 smd 0.47µf leak. * 25Aug97 anc *. check if it is not caused by the convergence module, If so, check integrated IC10. * 18Sep97 anc *.
PHILIPS53TP60C
Flickering image (see serr1).Check the aquadag and j540 connection. * 16Aug96 anc *.
PHILIPS53TP60C
Dos/menu - no color or different color.Measure +14v, possibility of r817 (1Û) being open. * 16Sep97 anc *. check transistor q603 and r609. * 25Sep97 anc *. check ic14 on convergence panel. * 12Aug99 anc *.
PHILIPS53TP60C
Turns off immediately after turning on.Check +130v adjustment, there is a possibility of the resistor r453 is changed. * 18mar97 anc *. check starting by monitoring the secondary of t401, while turn on, if there is no voltage, pins 1 and 3 of ic402 activate protected mode, check f402 po
PHILIPS53TP60C
Damage IC or TS semiconductorQ802, see possible changes in t801 (trans scan), with changed impedance (jsbck401). * 15Aug96 BC *. q906, see capacitor c906 smd (0.015) cracked, check resistor r934 may be open. * 10jan97 anc *. ic550, check smd capacitor
PHILIPS53TP60C
Damages resistorResistors r279/ r261/ r262 /r211 and r212 check integrated IC210, pin 3 (+0.6v). * 10jan97 anc *. resistor r934 opening when turned on, check if possible internal flyback sparking. *20Aug97 anc*.
PHILIPS53TP60C
Damage fuseF2 on the convergence panel, check transistor q107 in short. * 04Jul96 ac *.
PHILIPS53TP60C
Poor clo correction.Check adjustment of width trimpot r469. * 10jan96 anc. check capacitor c453 (3.3nf). * 15Oct97 anc *.
PHILIPS53TP60C
Colored outlines in the image (rgb).Integrated IC11 (X24C08P). * 11Apr96 BC *. check if fuse f2, if it is open check Possible short on red q107. * 04Jul96 ac *. check for possible cold soldering on power transistors, e.g.: in red see q356. *
PHILIPS53TP60C
Commands do not work (all).Check integrated ic301 (613029). * 18Sep97 anc *.
PHILIPS53TP60C
With list(s) in horizontal direction.Verificar capacitor smd c554 (.022) trincado. * 22ago97 anc.