Search: Panasonic
Results: 2880

Panasonic Repair Guide: Common Issues and Fixes

Brand Model Fault Detailed Problem Solution By
PANASONICEURO 4 TX21MD4
R/c intQ852 (2sc1383qrs), which was going o/c intermittently. it provides a standby 5 volt supply.
PANASONICEURO 4
Starts up then goes dead straight awayHt feed res r877 o/c - when replaced have peak white raster - d554 200v rect s/c
PANASONICEURO 4
St/by only - if st/by relay overided & a1 increased has "rainbow" effectCheck vert o/p chip & vdp3108bc2 jungle chip
PANASONICEURO 4
Field height increases and twitchesC402 0.amfd
PANASONICEURO 4
Cuts out when warm - may return to st/bySolder dry joints on ic801 (strf6654lf51)
PANASONICEURO 3HWS TXW36D
Loss of sync on chan change - ok on vcr chanIc801 tda9143-n1
PANASONICEURO 3H
Field collapseMod kit tzs8ek003 reqd when replacing field chip ic451 tda8350q/n5. costs 22p - worth >£10!
PANASONICEURO 2S TX29AD2DPB
Burst of eht at switch on then trips off after about 7 secs with frame collapse visible just as it went offIc601 vdp3108appa1 jungle ic (42.22ukp)
PANASONICEURO 2S TX29AD2DPB
Blank greenish raster with lines at top lh side - sound okIc601 vdp3108appa1 jungle ic (42.22ukp)
PANASONICEURO 2M TX25MD3
St/by only/ whistle on sound when fixedQ1212 bc847b blasted - when replaced set ok apart from whistle on sound caused by audio proc chip
PANASONICEURO 2M
No sound (relay clicked a few times before set switched on).Resolder xtal. x2101 beside audio processor chip ic 2101.
PANASONICEURO 2L TX28LD1
Field collapseTda8175-3 fop chip & d456 ma2160 - chips in short supply replace it with a tda8177. mod kit part no tzs9ek026-1 from seme
PANASONICEURO 2L TX25MD1
No picture - sound okF851 o/c then field collapse noticed. fit fop kit tzs9ek026-1 & blew fop chip - d425 s/c & r702 o/c
PANASONICEURO 2L TX25MD1
Filed foldover with thin r & g lines at topIc451 tda8175 & d456 ma2160b - kit pt no tzs5ek001
PANASONICEURO 2L TX21MD1
White snow effect on screen on high brightnessIc601 vdp3108a digi sigs proc chip
PANASONICEURO 2L TX28LD1/B
White screen with vert black thin lines from cold - ok if ic601 heatedIc601 vdp3108-25 luma/chroma proc chip
PANASONICEURO 2L
Vcr incompatibility - pulling at topIncorrect chan in use - use chan 0 (av)
PANASONICEURO 2L
Tuning drift & loss of sigs mid rangeResolder earths in tuner
PANASONICEURO 2L
Top foldoverIf tda8175 not available fit replacement chip (no n/k) & 1. r452 remove and fit wire link, 2. r457 change to 2.7k, 3. r456 check that it is 10k, 4. r460 check it is 18k, 5. r464 check it is 0r27
PANASONICEURO 2L
St/by onlyIc601 vdp3108-25 sigs proc chip faulty