Search: Panasonic
Results: 2880

Panasonic Repair Guide: Common Issues and Fixes

Brand Model Fault Detailed Problem Solution By
PANASONICALPHA 2
Blank raster - no tuningC2612 10µ non pol cap dry joints at pin 5 ic2601 tv/av sw ic
PANASONICALPHA 2
Black line on rh side of picCheck dry joints line dr trfmr before loptr bites dust!
PANASONICALPHA 2
Analogue bars not locked - pic okC3511 220pf connected to pin 24 pulse gen chip on txt panel leaky
PANASONICALPHA 2
After 4hrs r567 blows and q551 very hotC502 dry jointed
PANASONICALPHA 2
After 1hr text flashes on screen . text loses syncC3511 10nf
PANASONICALPHA 1W
No sound or picture - squealing from psu.D854 s/c , if still no good suspect loptx.
PANASONICALPHA 1W
No colourDon't make a mistake
PANASONICALPHA 1W
Loud wine but no picture.R851 ( 1.2r fusible ) go's high.
PANASONICALPHA 1W
Field collapseTda4505m faulty - use tda4505e & change r112 from 1m5 to 470k & r113 from 22k to 470k
PANASONICALPHA 1W
DeadNo 12v supply to line osc pin 7 ic101 from 12v reg ic851 - d855 o/c
PANASONICALPHA 1W
Cogging on vertsC808 10µ50v
PANASONICALPHA 1W
Chan ind lit with whistle and nothing elseNo line drive traced to ic101 tda4505-m1 jungle chip
PANASONICALPHA 1 TXC74
Width lackingQ753 2sd762 o/c
PANASONICALPHA 1 TXC71
Sound noisy - ok thro scartC2401 dry joint on av/tuning/control board
PANASONICALPHA 1 TX3
Line whisle with cogging vertsStr54041m - also check elects
PANASONICALPHA 1 TX2482
Line foldover then dead with loptr 2sd1441 s/cCheck for dry joints line dr trfmr & loptx
PANASONICALPHA 1
Whistling d854 s/c (rm2)C808 10mfd 63v in psu o/c replace rm2
PANASONICALPHA 1
Tuning - drift.Ic801.
PANASONICALPHA 1
Tripping with field collapseR7000 180k & r7005 150k start up res on side panel
PANASONICALPHA 1
TrippingD854 sr2kn avalanche diode s/c due to c808 10µ 50v low cap (could also be str54041m chopper chip) it is advisable to change both