Search: Panasonic
Results: 2880

Panasonic Repair Guide: Common Issues and Fixes

Brand Model Fault Detailed Problem Solution By
PANASONICEURO4
EURO4
High voltage varies with increasing brightnessStack13
PANASONICTXW28R4DP EURO4
No sigs - snow only on screenLeaky smd transistor marked "br" inside if section of the tuner. i used msb1218art1
PANASONICTXW28R4DP EURO4
Blnk raster - no osdMicroprocessor ic1101 part number sda5450c48
PANASONICTX32DK2 EURO 4
Int reverts to st/byD868 & d875 u/s part n/os in4150t77 & bzx79a75a26a
PANASONICTX28PK3 EURO 4
Locked mode displayed at sw on then reverts to st/byIc7066 eprom u/s
PANASONICEURO4TXW32R4
Sound srackling, vol goes up and downReplace ic251 la4282 on e board
PANASONICEURO4TXW28R4DP
Stuck in stbyLoptr q551 s/c, use kit tzs9ek001
PANASONICEURO4TXW28R4DP
No sound when rear speakers connectedReplace ic2704 tda2030av
PANASONICEURO4TXW28R4DP
Inoperative red led onLoptr q551 s/c, use kit tzs9ek001
PANASONICEURO4TX25LD4DP
Dead, comes on if external speakers are disconnectedR2702 150k o/c on c board (low +22v, +18v supplies on c board)
PANASONICEURO 4Z CT2153STX
Dead with q551 loptr s/cFit repair kit tzs9ek001
PANASONICEURO 4
Turns on and off immediatelyRes r877 e ou- d554 200v
PANASONICEURO 4
St/by only - if st/by relay overided & a1 increased has "rainbow" effectCheck o/p chip and vdp3108bc2 jungle chip
PANASONICEURO 4
Height increases and then turns offC402 0.amfd
PANASONICEURO 4
Turns off when it heats up, returns to st/byCheck and solder pins on ic801 (strf6654lf51)
PANASONICEURO 4
Av1 works well but does not select av 2 or 3Ic 601 vidoeprocessor (vdp3120bc2 ) dc voltage pin 63 (av2) and pin 64 (av3) if near 0v (normal 1.5v) then replace ic 601
PANASONICSC-HT75
Does not read CDs or DVDs. giving error h02.Spinder motor sticking, clean or replace it.
PANASONICSA-DK20
Does not read CDs or DVDs.Spindle motor sticking. clean it.
PANASONICTC20C6
No characters.Transistor q1135 (2sc1685).
PANASONICSA-AK17
Dead, error code f61.Transistor q307 shorted.