Search: Panasonic
Results: 2880

Panasonic Repair Guide: Common Issues and Fixes

Brand Model Fault Detailed Problem Solution By
PANASONICU2
Field collapseQ403 (darlington tr) 2sd837 - bd645 works
PANASONICU1
Sound - no sound or raster.R810.
PANASONICU1
No raster - eht ok.D818.
PANASONICU1
No colour - intermittent.Intermittent customer colour control.
PANASONICU1
Int field collapseDry joints trs 454 and 455
PANASONICU1
DeadQ801 bu326 chopper tr faulty - checked ok on meter
PANASONICTXW28R4DP EURO4
Sound dist from lh speakerSound processor ic2102 msp3410d part number msp3410dpob4
PANASONICTXW28R4DP EURO4
No sigs - snow only on screenLeaky smd transistor marked "br" inside if section of the tuner. i used msb1218art1
PANASONICTXW28R4DP EURO4
Blnk raster - no osdMicroprocessor ic 1101 part number sda5450c48 (30 gbp +vat).
PANASONICTXW28R4DP
Sw off aft 15 secs - sound & pic okR558 120k by loptx fback from beam lim to prot cct
PANASONICTXW-28-R4
TrippingLop tr s/c bu250bax use 2sd1577lb as replacement
PANASONICTXW28R4
Trips to st/by intC464 220nf had a 22nf cap fitted in error
PANASONICTXW28R4
St/by only loptr s/c (bu2508axlb)Replaced by 2sd1577lb for greater reliability
PANASONICTXG10
Trips on 12/24v workingCheck 12v supply from invertor pcb , if 6/7v check ic855 lm317 on main pcb for dry joints .
PANASONICTXG10
Field sync absentVideo proc chip ic 601 m52779sp 23 ukp from seme
PANASONICTXC78
Channel lights on but set just whistlesNo line drive ic101 tda4505-m1 us
PANASONICTX37A2
Low brightness + getting lowerQ355 on tube base
PANASONICTX33A1G
No sound/vis - raster presentDry joints on ic3505/2401 3 leg regs on h board near front of pcb,which is the plugged in pcb on the far l.h. side.
PANASONICTX32PL
Convergence errorsCrt faulty
PANASONICTX32PK1W/S
Dead with 3.15a fuse o/cOfficial mod to uprate fuse to 5a