Panasonic TV Repair: Common Faults and Solutions.
Search: Panasonic
Results: 2880
Results: 2880
Panasonic Repair Guide: Common Issues and Fixes
| Brand | Model | Fault | Detailed Problem | Solution | By |
|---|---|---|---|---|---|
| PANASONIC | TX25MD1/M | Line twitch - like loss of sync | Replacement ic601 @ £27 + vat | ||
| PANASONIC | TX25MD1 | Sound distorted & low | Ic2101 msp3410-15 64 pin device - don't order from sali cd -wrong | ||
| PANASONIC | TX25MD1 | Rgb lines at top of screen | Replace d454 and d456 | ||
| PANASONIC | TX25MD1 | Green speckles on rf and scart | Replace ic601 | ||
| PANASONIC | TX25MD1 | Field - 2 flashing col lines across centre of screen & lin problems on some pics | Replace tda8175 with pana spec type and check/replace d456 16v zener (ma2160b) s/c & change c456 (220uf 50v) | ||
| PANASONIC | TX25MD1 | Dead fuse blown | Replace posistor r808 | ||
| PANASONIC | TX25MD1 | Dead | Tda8175 field ic faulty & d456 ma2160 zener s/c | ||
| PANASONIC | TX25D1/BH | St/by only | Tda8175 fop chip (with "3" prefix), 1.25a wickman fuse off chopper tfmr o/c, d456 zener 16v maz160 s/c & check r472 4r7 hi res & 220µ 50v cap | ||
| PANASONIC | TX25AD2DP EURO 2 | Line jitter - int | Fit mod kit txs9ek002-2; but do not replace eeprom on this model or sound will be lost (pro logic version) | ||
| PANASONIC | TX25AD2DP | Wont go into standby | Replace q667 bc547b | ||
| PANASONIC | TX25AD2DP | Field collapse | Caused by faulty proc chip | ||
| PANASONIC | TX25AD2DP | Dead with red led pulsing | Rl6101 could be burnt up | ||
| PANASONIC | TX25AD2DP | Dead no standby light | Try replacing ic1801 | ||
| PANASONIC | TX25AD1DP | If eeprom is replaced and set switches to "0" and normal settings will not memorise | Press status on remote and function down on tv | ||
| PANASONIC | TX25AD1DP | Dark picture with sparking | Check brightness control on crt base | ||
| PANASONIC | TX25AD1/DP | No pic - only 3 hor lines across screen 10cm separation | 1st dis pins 4&5 of earom(24co706a) & check if field comes back.it did along with e-w errors which proves fop chip ok so replace vdp3108 kit part no tzs9ek002-2 | ||
| PANASONIC | TX25A2X | No text | Check c3517 100nfd50v | ||
| PANASONIC | TX24T1 | Blank unfocussed raster? - sound ok | L353 on crt base | ||
| PANASONIC | TX24A1 | No sound/vis - chan no. displayed | Ic801 str54041 - & check dry joints | ||
| PANASONIC | TX2482 | No sound - osd & scart i/p ok | Tda4505m (used tda4505e + mod). |