Philco TV Repair: Common Faults and Solutions.
Search: Philco
Results: 4740
Results: 4740
Philco Repair Guide: Common Issues and Fixes
Brand | Model | Fault | Detailed Problem | Solution | By |
---|---|---|---|---|---|
PHILCO | NI CPH-05 | Inoperative with open r720 | Ic 601 short | ||
PHILCO | NI CPH-05 | Inoperative with blinking LED | Ic101, r917, r925, r907, r908, c706,ic401 | ||
PHILCO | NI CPH-05 | Inoperative or intermittent | Cold welding c911, replace c706 with polyester | ||
PHILCO | NI CPH-05 | Entering intermittent st-by | R713 open | ||
PHILCO | NI CPH-04 | Dull | C304 | ||
PHILCO | NI CPH-04 | Retrace lines on top | D304 | ||
PHILCO | NI CPH-04 | Turn on and off | Zd304 | ||
PHILCO | NI CPH-04 | Turns off intermittently | Priapism | ||
PHILCO | NI CPH-03 | Little shine | Flyback | ||
PHILCO | NI CPH-03 | Inoperative or intermittent power on | Change the 3 4.7uf caps of the power supply | ||
PHILCO | NI CPH-03 | After hot it turns off | Flyback | ||
PHILCO | NI CPH-03 | No contrast adjustment | R766 | ||
PHILCO | NI CPH-03 | W/o vertical sync when heating | D651 | ||
PHILCO | NI CPH-02 | Insufficient vertical deflection | R616, c607, c609 | ||
PHILCO | NI CPH-02 | Repulsing image | C216 | ||
PHILCO | NI CPH-02 | Without video and sound...with brightness | Cold welding in l206 | ||
PHILCO | NI CPH-02 | Weak antenna signal | Replace q201 | ||
PHILCO | NI CPH-02 | No horizontal synchronization | Qah07 | ||
PHILCO | NI CPH-02 | Image distorts intermittent | Cold welding in l203 | ||
PHILCO | NI CPH-02 | After it heats up it turns off | C607 with leak |