Search: SAMSUNG
Results: 3754

SAMSUNG Repair Guide: Common Issues and Fixes

Brand Model Fault Detailed Problem Solution By
SAMSUNGCI537 P55
Int dead with relay chatteringReplace relay & check ph01 d/j
SAMSUNGCI5344N
Service mode accessSwitch to bbc1,press standby, display, menu, mute and standby.
SAMSUNGCI5344N
No sound at sw onCheck values sct=16, sbt=17 and scr=5 in serv mode. once entered select reset, tv resets and switches on.
SAMSUNGCI5344N
No control of col, contr, brill - dark picFirst switch on tv on bbc1. press this in order standby, display, menu,mute, and standby the tv will switch on with no sound.you must check these values sct = 16 sbt = 7 scr = 5 once these values have been entered select reset mode. the tv will reset and then switch on.
SAMSUNGCI5344
Poor/no col, no or noisy sound or no sync setting optionWrong options set - to reset to uk standard - sw on at mains sw, use r/c to go to st/by, key in "display", "menu", "mute", & "standby" in quick succession to enter option set up. set option for "ci", go to reset, press "vol up" (the display will show "wait for 5 secs"). finally go to st/by
SAMSUNGCI533CN S51A
No sigs - ok thro' scartAdj in factory setting menu - need service manual for info
SAMSUNGCI5337AN US60A
Dead - no line driveIc101 tda4504b 12v supply low at 8v. d801 1n4007 in 12v feed leaky
SAMSUNGCI5337AN
Partial field collapse & dark pic aft 2 minsIc802 12v reg i/p only 9v instead of 15v - d801 1n4003 leaky
SAMSUNGCI5337
No sound aft warm up with slight darker picIc802 12v reg i/p & o/p low - d802 1n4003 feeding it was leaky
SAMSUNGCI5332T
Sound at max and can't be turned down - osd okR625 10k in vol dc network o/c
SAMSUNGCI5332T
Sound at full blast even when turned downR625 10k oc
SAMSUNGCI5330AN
Dead c412 burntReplaced c412 1000pf 2kv & loptr
SAMSUNGCI533
Whistling, no line outputC412 (482212613155) s/c
SAMSUNGCI5322XT
Dead - psu overworking & ht excessive at 250vCorrect ht 125v when c852 470µ 16v replaced but r826 1r o/c & loptr 2sd1650 s/c also
SAMSUNGCI5322T
St/by led comes on briefly at sw on then deadC817 100µ low cap
SAMSUNGCI5322T
No sound/pic - raster present when a1 advanced5v supply low from ic803 5v reg - reg s/c
SAMSUNGCI5322T
If replacing width coil gives tuning/if fault chec21" 32449-412-650 14" 32449-412-603
SAMSUNGCI5322T
DeadR801 5r6 7w o/c; c816 2200pf 1kv cracked & leaky
SAMSUNGCI5322
Field collapseR412 o/c & check d401 erb4304 also c307 100µ 50v
SAMSUNGCI5322
Field collapseR412 oc also replace d401 and c307 ( 100uf )