SAMSUNG TV Repair: Common Faults and Solutions.
Search: SAMSUNG
Results: 3754
Results: 3754
SAMSUNG Repair Guide: Common Issues and Fixes
Brand | Model | Fault | Detailed Problem | Solution | By |
---|---|---|---|---|---|
SAMSUNG | LN26D450 | Didn't tune in to any channel | C-246 smd capacitor shorted between 9v reg and 5v reg just change and hug!!!! | ALEKSANDRO | |
SAMSUNG | CL21Z58MQ | With sound without image | R270 10k changed to 14.65 | Alex | |
SAMSUNG | UN32F4200AG | Flashing screen led | Everything indicated that it was an LED but it was the power supply board regulator | Ba751 close to j 815 | Tec Center |
SAMSUNG | CL21A551ML KSCB | Does not turn on, nor does the stand-by LED light up | Precision resistor r821b, altered or opened | Replace for the same (electronics brazil) | George/Eletrônica Brasil |
SAMSUNG | UN50RU7100G | Samsung tv un50ru7100g won't turn on, sby leds blinking 2 times | 3.3/1.8 regulator shorted | Jampea | Ronaldo |
SAMSUNG | UN40F6400 | TV turns on and off | Turn off protection, jamper 801 and measure voltage on the bus mosfets. tsound are 4, one pair is controlled by a ci slc 2013 and the other 2 mosfets by another slcc 2013. the mosfets are inoperative, replace the ci that controls them. | 2013 ci slc replace | Pronto Socorro do Lcd |
SAMSUNG | UN40J5300-5500 | With sound, screen on and no video | Tcon bn98-05910a with 3a fuse open and ce1 (10nf smd) short | Replace fuse and capacitor | SANTOMEL |
SAMSUNG | UN48J5OOO-5200-5500 | With sound screen on without video | Tcom bn98-06143a with CD1 and CD2 (10mf smd) shorted | Replace | SANTOMEL |
SAMSUNG | UN32-40F5200-5500 | It has sound, LEDs light up and no image | Tcon co open 3a fuse and smd capacitor ce1 (10mf) | Replace | SANTOMEL |
SAMSUNG | UN50D8000 | The power supply relay keeps hitting. | Short the pins of the opto coupler pc802. (on the photo transistor side). | If it lights up normally, replace the LED strip. | Persio (TVCompany) |
SAMSUNG | UN46D6400 | The power supply relay keeps clicking and the screen goes on and off. | Short the pins of the opto coupler pc802. (on the photo transistor side). | If it lights up normally, replace the LED strip. | Persio (TVCompany) |
SAMSUNG | CL29Z43MQ | Cushion effect screen | D408 shorted, when changing it shorted again | Swap d408 and cr404s without capacitance causing it to burn. | EDIVAN ELETRONICA |
SAMSUNG | UN39EH5003 | The TV stays on standby flashing directly and when you remove the connector from the main one, the LEDs start flashing too | Open dm 804 or 805 diode. in the power supply primer. | Mariano | |
SAMSUNG | T22B300 | TV completely turned off | It was running, it made a few clicks and stopped. | Changing the icm801 str w6052s, cm804, dm801 and dm803 and the TV started working again. | Manoel Damião |
SAMSUNG PLASMA | PL50C450B1 | TV turns on with logon sound but no image appears. | Short or leak in capacitors c2096/c2097 (near the flat that connects the main board). | Replace tcon board | Joaquim Santana |
SAMSUNG | UN32F5500AG BN44-00605A | TV turns on with all functions but the LEDs do not light up | A burned out LED on the LED bar (replace the LED or the bar), after the change the LEDs still do not light up: zd9101 (y8w/39) open on the power supply board, remove from another scrap board | George Luís | |
SAMSUNG | UN32F5500AG BN44-00605A BN44-00605A | TV turns on with all functions but the LEDs do not light up | A burned out LED on the LED bar (replace the LED or the bar), after the change the LEDs still do not light up: zd9101 (y8w/39) open on the power supply board, remove from another scrap board | George Luís | |
SAMSUNG | T24B301LB | Does not turn on, short circuit on the 3.3v line, in the 25q40 flash memory (ic1302) tsound was a lack of 3.3v, short to ground. | Ic 202 (1g) changed damaged the ic 1201 smd (nt61p805)... went to change and run for hug.... | Ic202 e ic1201 | MIGUELTV |
SAMSUNG | T200M | It works for about 5 minutes and turns off the screen and tsound is only audio | Lack of 5v on pin 1 of the fan7317 | Jump pin 18 enable to pin 1 of the fan7317 and the lamps are on | Beto2828 |
SAMSUNG | T200M | It works for about 5 minutes and turns off the screen and tsound is only audio | Lack of 5v on pin 1 of the fan7317 | Beto2828 |