TV Repair: Common Faults and Solutions.
Search:
Results: 87436
Results: 87436
Repair Guide: Common Issues and Fixes
Brand | Model | Fault | Detailed Problem | Solution | By |
---|---|---|---|---|---|
SONY | DT4 | No laser in new optical device | There is no laser in a new optical pick-up device. pin 9 andpin 8 are shorted in factory. all new fop (optical pick-up devices) havethe same problem. | ||
SONY | D2 | No laser in new optical device | There is no laser in a new optical pick-up device. pin 9 andpin 8 are shorted in factory. all new fop (optical pick-up devices) havethe same problem. | ||
SONY | D4 | No laser in new optical device | There is no laser in a new optical pick-up device. pin 9 andpin 8 are shorted in factory. all new fop (optical pick-up devices) havethe same problem. | ||
SONY | CCDV2 | F-902 keeps blowing | Iris stays closed, unit shuts down after a few seconds incamera mode only. f-902 keeps blowing. | ||
SONY | CCDTR5 | Missing part number step up ring/ 3-707-568-01 | Part number is missing for the step-up ring from 37mm to 40mm. -hq comments: the part number is 3-707-568-01. | ||
SONY | CCDTR5 | Only zooms one way | Unit only zooms one way. | ||
SONY | CCDTR5 | Dead unit | Unit came in dead. | ||
SONY | CCDTR5 | Camera section dead | Camera section dead, vtr is ok. | ||
SONY | CCDTR5 | Eats tapes | Unit eats tape. they were catching on the take up reel. | ||
SONY | CCDV99 | Picture blanks briefly during insert edit | When an insert edit is done through the composite video inputs(not hi8) onto a tape with hi8 recording, a problem occurs on playback onthe inserted portion. at the edit points there is a glitch where the pic-ture blanks quickly. the edit is not a clean | ||
SONY | TCRX400 | Pcb layout differences | Pcbs differ in these two tape decks. both pcbs differ fromthe layout in s/m. is there a s/m supplement? -hq comments: there are no supplements published. i will ask tokyofor information on changes and respond to you. there is an extra jumperground | ||
SONY | MDP700 | Lines in video | Noise lines in video while playing, but not in pause or stopmodes visible in color or black and white pictures. | ||
SONY | CDP200 | Replacement of ic-602 | New ic does not work. | ||
SONY | CDP101 | Replacement of ic-602 | New ic does not work. | ||
SONY | CDP701 | Replacement of ic-602 | New ic does not work. | ||
SONY | CDP400 | Replacement of ic-602 | New ic does not work. | ||
SONY | KV27XBR10 | No power up from front panel, found d-106 in place of c-115 | Unit would not power up from front panel - all other functionsokay. | ||
SONY | PCM601ESD | Noise in audio | After unit ran for a few minutes, noise would appear in audio.observing tracking status also showed dropout of rf. pattern was consis-tent with previous problems with thermal ic506s so replaced ic. reconnec-ted unit and ran a few minutes. problem reoc | ||
SONY | SLHF750 | No power back-up | During power out, how long should the sl-hf750 maintain timermemory? what circuit or circuits are responsible for the memory? -hq comments: our lab unit holds memory for about 15 - 30 seconds. thetransistor circuit for the power down tells the micropr | ||
SONY | MVCC1 | Part number for blank disks | What is the part number for mavica blank disks? -hq comments: the part number is vfd-50. every ssc should have disksfor repair on hand. |