Search:
Results: 87424

Repair Guide: Common Issues and Fixes

Brand Model Fault Detailed Problem Solution By
SONYCCDV110
Unit deadOpen fuse f381 on the sc-6 board. tape inside unit. -hq comments: please try to determine the mode of operation duringfailure and check for bent pins on the multipin connector if you receiveany similar units.
SONYCDP310
Disc will not clamp after loadingPlastic piece broken off left post that holds chucking armin place.
SONYSLHF1000
Audio muting in pcm during recording/playbackAudio mute in pcm mode during recording/playback.
SONYCCDV3
No camera video - playback okNo video from camera, playback ok. camera video looks as ifhoriz. sync. freq. is off, but flashes bright sometimes. found x721on vc-20 board not oscillating.
SONYCCDV110
No playback videoNo video on playback. appeared to have defective video heads.rf output from heads, and head amp normal. found loss of gain in q227 onvi-21 board.
SONYKPR36XBR
No left channel, resoldered ic5008/pin 7One speaker dead.
SONYWMF77
Audio cuts out with movementAudio cuts out with movement.
SONYWMF77
No audio in right channelNo audio - right channel.
SONYCFSW440
Inoperable play buttonPlay button not working.
SONYCFSW360
Eats tapesEats tapes.
SONYKV2792R
No sound, resolder t-801No sound. pix ok.
SONYCCDV110
Camera would flash bright/darkVideo from camera had what appeared to be incorrect horiz.freq. and would flash bright/dark. playback from vcr section ok.found x701 on the cp-18 board had no cw output. the output pulsed, butwould not ring.
SONYCDP510
Skipping on first trackStock unit. skipping on first track. found sled drive vol-tage going to 1.8v-2.0v before the sled would move. loosened sled motorholding screw and repositioned worm gear to open meshing with sled gear.now drive voltage goes to 0.6v and sled moves smoo
SONYCCDV110
Multiple image in viewfinder and poor soundMultiple image in viewfinder and poor sound.
SONYCCDV110
Unit would not power-upWould not power up.
SONYCDP510
Disc will not clamp after loadingBreakage of chuck arm and loss of chuck arm roller.
SONYTCR302
No recording from one channelNo record one channel. found record level control rv301 open.
SONYTCW530
Record level will not set from tapeRecord level will not set from tape, everything else ok.
SONYXR27R
Right side deadRight side dead.
SONYCDP55
Unit skipsTransformer buzzing and unit skips.