PHILCO TV Repair: Common Faults and Solutions.
Search: PHILCO
Results: 4758
Results: 4758
PHILCO Repair Guide: Common Issues and Fixes
| Brand | Model | Fault | Detailed Problem | Solution | By |
|---|---|---|---|---|---|
| PHILCO | PCM-2044 | Dead | R908 | ||
| PHILCO | PCS-2952 | Turning on and off | R912 - 2k2 | ||
| PHILCO | TP-2052 | Power supply oscillates, tries to start and falls | Loose chopper core | ||
| PHILCO | TP-2054 | Flashing image | A rabble | ||
| PHILCO | PCS-2700 | White stripes, turns off intermittently | Verficiar r715 e c718 | ||
| PHILCO | TPC-2910 | Doesn't start | Check ic501, tl431 | ||
| PHILCO | PCM-1446 | Doesn't start | Verificar saldo c911 | ||
| PHILCO | PC-2142 | Doesn't start | Priapism | ||
| PHILCO | TP-2053 | Blue stripe at the top | Smd c821 | ||
| PHILCO | PCM-2046 | When turned on tsound is no synchronization, after a few minutes it normalizes | C722 | ||
| PHILCO | TP-2054 | Burns the tda16846 power supply ci | Check the capacitor c938 220nf and the zener diode zd 904 12v | ||
| PHILCO | PCM-2046 | Dark image | C116 -> 470k | ||
| PHILCO | PCS-2950 | No characters | Coil l-1103 remove the two capacitors from inside and place two 47pf capacitors and then just adjust the coil to center the characters. | ||
| PHILCO | CPH05 CPH05 | Intermittent operation | Check tracks(tracks) under resistor r708 | ||
| PHILCO | PCM2051 | Turns off by itself | Zener zd941 | ||
| PHILCO | TP-2054 | White spot on the screen when tsound is no signal | Put cap. 1nf/50v in parallel with zd702 | ||
| PHILCO | TP-2054 | Dead or intermittent power supply | Check d915 | ||
| PHILCO | TP-2054 | Low power supply operating intermittently | Check zd904 and c945 | ||
| PHILCO | TP-2054 | Black band, does not adjust horizontal phase | Zd702 | ||
| PHILCO | PCS-2976 | Power supply above 175v | Open 2k2 r917, diode d908a |