PHILCO TV Repair: Common Faults and Solutions.
Search: PHILCO
Results: 4741
Results: 4741
PHILCO Repair Guide: Common Issues and Fixes
Brand | Model | Fault | Detailed Problem | Solution | By |
---|---|---|---|---|---|
PHILCO | PC2138 | Blurred image. | C725=4.7uf for 250v, without capacity (note); if this same capacitor is shorted, the screen turns white with trace lines and the TV turns off by itself. | In both cases, the same part just needs to be replaced. | Armando da eletrónica só tv |
PHILCO | PCS2976 | Horizontal closing on the side | Open resistor r1702 | Replace the 150k r-1702 resistor | Cícero André |
PHILCO | PCS2956N | Does not shoot horizontally | Ci vertical | Replace tda 8177f | ELETRONICAASTEC |
PHILCO | PCM-1451 PCM- 2051 | It turns on when it's cold, then turns off and doesn't turn on again, sometimes it turns on | C708 -471k x 2kv polyester measure it's good you have to change it put one of 331kx2kv | ELETRONICA ARNI-LEOBERTO LEAL /SC | |
PHILCO | PCM-1451 PCM- 2051 | Image with shadow | C708 -471k x 2kv poliester | Help yourself leave your tip | ELETRONICA ARNI-LEOBERTO LEAL /SC |
PHILCO | PCS2976 | After starting but then turns off | Cap c730 4n7........ | clayton | |
PHILCO | 1451 | It turns on (when cold) but if it turns off it won't turn on again | C 708 e c709 poliester | tyko | |
PHILCO | PCM 2046 | LED blinking TV won't turn on | Transistor q901 short, capacitor c915 dry | Replaced components | filipak |
PHILCO | TP-2054 | Shows the burnout of the vertical integrated | Change c 614 | This capacitor being shorted immediately burns the integrated | milton |
PHILCO | TPF-2940 | Voltage +b with 10v led on and it doesn't work if you press the power key it makes a noise and it doesn't work | D-919 byv26 | Put a new one in it was great | samuel leite |
PHILCO | PCM 1446 | Doesn't work | High power supply not working, I removed tsh and +b appeared, I changed tsh but the TV didn't work. capacitor c924 and c719 also defective | Replaced tsh and capacitors tv func ok | almirguarani |
PHILCO | TP2054 | The standby LED keeps flashing and makes a noise trying to oscillate | Diode d908 | Replace d908 which is shorted | Eletrônica Som & Imagem |
PHILCO | TPF29S4F | Closed horizontally, cushion effect | R-1701 of 10r open | ladmyr | |
PHILCO | PCM1444 | Dead | R902(open) | To replace | JARBAS SANTOS |
PHILCO | TP-2053 | High power supply, device takes time to work | 19 | Take it out and measure it if there is even a slight replace causing the defect. | C.SOM |
PHILCO | TPF-2941 | Works and turns off after seconds | C805-47u/160volt's | jarbas santos | |
TV PHILCO HITAUTEC | PCR 1447 | Burning r 707 | Fly back ruim ov2094/d1 oub321087879-01b | Marcone | |
PHILCO HITACHI | PC 1442 | Has sound, screen opens and closes quickly | R 725 4r7 behind the fly back | Marcone | |
PHILCO | TP2052 | Image takes a while to appear when you just turn it on | Bad screen potentiometer contact | Replace the fly back or try cleaning the potentiometer with wd 40 | Alessandro |
PHILCO | PCM 1444 | Stand by LED on and does not arm the power supply | Q904 bc 546 with leak | pedro ironei jr |