PHILIPS TV Repair: Common Faults and Solutions.
Search: PHILIPS
Results: 14169
Results: 14169
PHILIPS Repair Guide: Common Issues and Fixes
| Brand | Model | Fault | Detailed Problem | Solution | By |
|---|---|---|---|---|---|
| PHILIPS | 40PFL5615D | Does not turn on, primary power supply with no apparent damage. | Check for short in the rectifiers of the +b 3.3v line | BRUSKE | |
| PHILIPS | 14GL1015 14GL1316 20GL1045 20GL1045 20GL1047 20GL1346 GR1-VA | No image | Capacitor 2410 open | This open capacitor creates excess lines at the top of the screen and the television cuts the signal so as not to damage the tube | Bruno Capozzoli |
| PHILIPS | 20PT3331 | Closing vertically at the top of the screen | Cap 2465 10uf 160v | preá | |
| PHILIPS | 21PT6456/78 | Turns off after turning on. the horizontal output is heated. | Fly-back (jf0501-19272) shorted | Replace for a new one, TV is ok! #let's help, post your tip# | andlss (AL TECNOLOGIA) |
| PHILIPS | 21PT9467C/78 | Vertical almost completely closed, with intertwined lines in the middle. | C315 and c316 of 1000 uf for 25 volts, swollen and low capacity. | They were replaced and it was ok. | Armando de Olimpia, Eletronica EvoluSom. |
| PHILIPS | 29PT9467C | Turns on but no image | C504 (screen capacitor) - change without measuring | ||
| PHILIPS | 42PFL3403/78 | Doesn't work | D130, 131,234 and q201 (all shorted) | Replace of d130,131,234 and q201. | LUÍS PIMENTA |
| PHILIPS | 21PT9467C/78 | Vertical closed at the bottom | R310 (0.68x2w) auterado | LUÍS PIMENTA | |
| PHILIPS | FWM-M371 | Doesn't start. standby LED is on and nothing happens. | After checking all voltages and they were normal, the computer did not release the power on voltage. like everything else in order, the computer could only be frozen, after doing all the tests before going to change it, I checked the keyboard, which had the aux key shorted, I changed it and it started working, However, the CD would not open the drawer, after the necessary checks the drawer motor would not start and would not initialize the system, after changing everything returned to normal. | CALIXSERVICE | |
| PHILIPS | 32PFL3403 LC8.1L LA | TV blinks, turns off and turns on quickly | In addition to removing c303, c304, exchanging r 3k3 for 4k7, removing c922, also exchanging c 903 and c911 of 47x63 105° | joaomvjr | |
| PHILIPS | 21PT9467C/78 SK4.0L | Does not turn on without secondary voltage, the LED only flashes | Q605 2sa1013 q607 2sc2230 d615 1n4148 | DJALMA MOREIRA | |
| PHILIPS | 20PT3331 | Turning off in fi | R3450 27k aberta | Replacement | Toninho Pacheco |
| PHILIPS | 14PT3131 | LED lights up and then goes out, secondary voltages low | 2.2uf electrolytic capacitor exhausted | Replace the c 2528 | ELETRONICA ELETROSONIC |
| PHILIPS | CTS-AA CTS-AA | Makes attempts to turn on, but turns off immediately. | Check the 8v line. | Replace without measuring transistors t7577 and t7575 - bc337. | Electrohd |
| PHILIPS | 42PFL 5432 | No image, only sound | Change ci bd9897fs. In my case it worked. | Pedro Ironei [Assitel Eletronica] | |
| PHILIPS | GX1650 | Just tune in to channel 2. | - open 3650 resistor (tsound is no 33v | Replace the same | eletronica shalon |
| PHILIPS | 29PT8568SLIM SK5.1L | Reduced width - two black vertical stripes, one in each corner of the screen (+ - 10cm) | Zener diode, position zd440 with leakage. | Replaced zd440 zener diode, the TV was ok. | Clayton |
| PHILIPS | 21PT9467 | Normal characters and sound but no image. | D 307 c fuga | Replace d307 | DEBIQUE |
| PHILIPS | FWM996 | Without sound or pre with audio | After changing the integrated tda8920bj and the transistor buk9507 the problem continues | After killing myself testing the 10r resistors, everything was ok, I discovered the 39k r322 open and hugs | cico |
| PHILIPS | 14PT218A/78 | I'm sound | Burned speaker I took tips from another model and it worked for mine | Speaker replacement | marcio |