Search: PHILIPS
Results: 14169

PHILIPS Repair Guide: Common Issues and Fixes

Brand Model Fault Detailed Problem Solution By
PHILIPS21PT9467
This TV arrived at my workshop with a burnt vertical ci, I replaced it but a resistor at the base of the ci was hot and with thin stripes on the TV screenThe vertical one was not the originalPutting the original vertical was normal, just run for the hug.ozenildo
PHILIPS29GX1899/78R
Stretched image/pulling to one color/taking time for the image to appearCap.elet.position 2431 (100mf x 200v) completely exhausted.Replace the same.jheliocavalcanti
PHILIPS20PT529A
Turns off after a few minutes onCold solder on flyback negativeRe-weld the flybackFilipe
PHILIPS14PT3331
It turned on but after 1 second it turned off it generated but stopped standby it came onSmd capacitor 2518 position on the boardThanks to the friend who gave this tip, he just replaced it and the TV worked normally, thank youjanilson
PHILIPS29PT4643
LO4U-AA
Replace note; if the horizontal output burns out after replacing it, replace the flyback7408 with changedReplace note; if the horizontal output burns out after replacing it, replace the flybackpaulo-maceio/al
PHILIPS29PT554
Does not turn on, the LED does not light up, tsound is no voltage +b33 k 3510 resistor close to the rectifierBarter itFELIPE
PHILIPSTV 29PT4635
It has all the +b and it doesn't workC2455 47x25 weakJust replace the c2455 for a new onePaulo Sertel Itararé SP
PHILIPS21PT9467
TV with a black band at the bottom of +/- a 4 fingers after fly back leaked high voltageIntegrated (ic-102) tda-9372 - does it allReplacing the ic does it allNova Eletronica
PHILIPS29PT4635/78
Vertical closed3488 resistor near 4.7lr charred flybackReplacementEliel
PHILIPSFW-C252
FW-C252
Turns on normally - but doesn't open the CD cover - and tsound's no sound - not even on the radioWsound tsound should be 12v tsound is 5v cause---diode - 6394 - 1n4003Diodo - 6394 - 1n4003neupsx4download
PHILIPS21PT8467/78
I'm soundAfter recording the eeprom it didn't solve the problem.Remove the zener diode 6908 from 2v7..eletronica o k
PHILIPS21PT8467/78
I'm soundAfter recording the eeprom it didn't solve the problem.Replace 2v7 6908 zener diode.. replace without testingeletronica o k
PHILIPS21PT639
Dark stripe on the left side and mirroredR3490 8k2 openEletronica Aguiar
PHILIPS14PT3336
L03-6L
With sound with characters dark screen without imageR.3442,150 k abertajps eletr,campo,grande
PHILIPS32PFL3404
Does not turn on, customer complained of a burnt smell.Reactor transformer with poor contact, be careful to remove the transformer and check underneath it, repair it itself and it will work againzambra
PHILIPS29PT6665/78R
TV does not work when trying to turn it on if tsound was a strong hiss, like horizontal out of frequency.Fly-back, defective.It was replaced and it was... ok.Armando de OlĂ­mpia,Eletronica EvoluSom
PHILIPS20GL1346
Does not turn on low power supply 40 v LED keeps flashingFlybackReplaceEletroClaudio Aguas Belas
PHILIPS20PT3331/78
Sometimes it works, sometimes it doesn't (intermittent)Cold solder on the fly back, horizontal output (almost imperceptible)Let's resoldThis email address is being protected from spambots. You need JavaScript enabled to view it.
PHILIPS21PT9467
Closing verticalNormal image, when it heats up it closes at the top and bottom with linesDeflector coil, heats and replacesrock & shock
PHILIPS29PT5642
Dark image with little brightnessR3454Replace without measuring 47kdigital tec