PHILIPS TV Repair: Common Faults and Solutions.

Search: PHILIPS
Results: 14170

PHILIPS Repair Guide: Common Issues and Fixes

Brand	Model	Fault	Detailed Problem	Solution	By
PHILIPS	FW670P	When you increase the volume it goes to total (maximum)	Replace eprom		Schulz
PHILIPS	29PT4635/78	After turning on, image oscillates between RGB and off	Trc / cinescopio	Replace of the same	eletronicaapolo
PHILIPS	14GL1010 GR1-AL	I'm a year old	R 621 cut	Replace	Elias2305
PHILIPS	14GX1618/78R ANUBIS VA	Jagged image	Cap 6531 47/ 160 volts, one of the terminals was corroded, as it is glued, you can't see it, you can only remove it from the board.		jorge mota
PHILIPS	21PT5435 L03.LAA	Alloy keeps buzzing in socket with spark of fire white screen flashing cmo frorecent	It appears to be the socket or very high horn coming from the flayback. but the defect is the tube	Replace the bubo	This email address is being protected from spambots. You need JavaScript enabled to view it.
PHILIPS	21PT8467/78	Normal audio and characters, no luminance	100k resistor, position r3442, line abl	Replace the same	eletronicaapolo
PHILIPS	29PT4643	Vertical keeps shrinking at the bottom and sometimes turns off	Chap. 2625 (smd 2.2uf x 6.3v) close to the Audio ci		Ronie Grein
PHILIPS	14GL1015	Low power supply less than 40v	Flyback shorted between pins 9 and 10		ELETRÔNICA GOMES
PHILIPS	14GL1015	When you tune in, it's black and white or changing the channel has interference	Broken channel processor		ELETRÔNICA GOMES
PHILIPS	14GLK1015	Dead, supply low less than 40 v,	Short flyback, pins 9 and 10		ELETRÔNICA GOMES
PHILIPS	20GX1659 GR6-AL	The TV has sound but no image, when you open the screen, it gives you a dark, speckled screen (the stand-by LED flashes four times)	Saida vertical tda8356	Replace tda8356	Eletronica Som & Imagem
PHILIPS	14PT	TV doesn't tune the channel or the pal. I even changed the selector but it didn't solve the problem.	On the third and fourth pin of the seletronic tsound is each one a resistance (smd 101) that is 100Ω.		heliomar
PHILIPS	20PT	TV doesn't tune the channel or the pal. I even changed the selector but it didn't solve the problem.	On the third and fourth pin of the seletronic tsound is each one a resistance (smd 101) that is 100Ω.		heliomar
PHILIPS	21PT5433	TV doesn't tune the channel or the pal. I even changed the selector but it didn't solve the problem.	On the third and fourth pin of the seletronic tsound is each one a resistance (smd 101) that is 100Ω.		heliomar
PHILIPS	21PT5433	Without image but with sound and menu characters	When turning on this TV, it came with no image but with sound and tuning. The screen was completely dark, the menu characters acted and were visible on the screen but the channel image was missing.	100k resistor 3442 fully open, it works close to the flayback but precisely on pin 10 of it	This email address is being protected from spambots. You need JavaScript enabled to view it.
PHILIPS	20MT2131	TV with vertical closed at the bottom and no sound	Main cause is the 24c16wp eprom memory, tsound is no point in adding another 24c16 type, it has to be the same as the 24c16wp	It was replaced and the TV was broken, as a precaution, also replace the capacitors that are close to the flayback, those of 470mfx16v or 10mfx160v, 47mfx50v, 47mfx16v	This email address is being protected from spambots. You need JavaScript enabled to view it.
PHILIPS	20PT3336	TV with vertical closed at the bottom and no sound	Main cause is the 24c16wp eprom memory, tsound is no point in adding another 24c16 type, it has to be the same as the 24c16wp	It was replaced and the TV was broken, as a precaution, also replace the capacitors that are close to the flayback, the 470mfx16v or 10mfx160v, 47mfx50v, 47mfx16v	This email address is being protected from spambots. You need JavaScript enabled to view it.
PHILIPS	20PT3333	TV with vertical closed at the bottom and no sound	Main cause is the 24c16wp eprom memory, tsound is no point in adding another 24c16 type, it has to be the same as the 24c16wp	It was replaced and the TV was broken, as a precaution, also replace the capacitors that are close to the flayback, the 470mfx16v or 10mfx160v, 47mfx50v, 47mfx16v	This email address is being protected from spambots. You need JavaScript enabled to view it.
PHILIPS	20PT3331	TV with vertical closed at the bottom and no sound	Main cause is the 24c16wp eprom memory, tsound is no point in adding another 24c16 type, it has to be the same as the 24c16wp	It was replaced and the TV was broken, as a precaution, also replace the capacitors that are close to the flayback, the 470mfx16v or 10mfx160v, 47mfx50v, 47mfx16v	This email address is being protected from spambots. You need JavaScript enabled to view it.
PHILIPS	20PT3336	Does not turn on, +b 103v ok, when it turns on it only gives a small pulse on the fly and stops, (can be observed with a neon lamp)	R3445 of 1r/1w changed, or check all fly secondary street.		Bruske