PHILIPS TV Repair: Common Faults and Solutions.
Search: PHILIPS
Results: 14170
Results: 14170
PHILIPS Repair Guide: Common Issues and Fixes
Brand | Model | Fault | Detailed Problem | Solution | By |
---|---|---|---|---|---|
PHILIPS | 20GX1656 | Image with ripple and power supply fet heats up excessively. | Replace ic 7520 (uc 3842bn) | Persio(TVCOMPANY) | |
PHILIPS | 14PT110 | Inoperative without any power supply | 6540 diode track open on cabinet support | ANTONIO NOBREGA [PATOS.PB] | |
PHILIPS | 29PT5645 | Does not turn on or turn on stand-by | Fotoaclopador et1103 | Replace photo coupler ET1103 | Eletronica Som & Imagem |
PHILIPS | 20PT326A | LED blinks once and turns off | Check driver transistor | ||
PHILIPS | 20PT326A | LED flashes 4 times does not turn on | Transistor 7608 smd | ||
PHILIPS | 29PT5642 | Vertical with lines at the top (when alloy comes with 3 lines at the top) | Check c2465 10mf/160v | Badri | |
PHILIPS | 21PT5433 | Bu \ warms up turns off | C 2455 | Ok | ROBERTO |
PHILIPS | 29PT552A | Oscillates and at the same moment turns off... LED flashes and then lights up... goes into protection | Transistor 7481 (bc557) changed | Replace | Rogério |
PHILIPS | 29PT552A | Oscillates and at the same moment turns off... flashes and then lights up..... goes into protection | Transistor 7481 (bc557) changed | I replaced it, it was a show...... | |
PHILIPS | 29PT4636/78 L01.1L | It doesn't turn on, the LED doesn't light up like death, it has all power supply voltage | C 2455 measures good, for horizontal oscillation with oscilloscope, no current for transistor bu4508 | C 2455 replace without measuring | Benasse |
PHILIPS | 21PT5431 | Turns off after thirty seconds | Defective transistor 7461 bc337 | Replace it even if it is in perfect condition and adjust the screen | Edilson Bomtempo |
PHILIPS | 14PT 316A | Bad fly back and subsequently burning horizontal exit | R 3662 180r open r 3538 82k changed r3517 10k changed these resistors changed was raising the supply to 112v and the normal is 99 v | CARLOS AUGUSTO | |
PHILIPS | 21PT8467/78 SL03.1L31 | Vertical closed beeping appearing to be horizontal | R3445 1r open | CARLOS AUGUSTO | |
PHILIPS | 14GL1310 | I'm sound | Oddly enough, the 12v zener (d147) was altered. | Replace d147- 12v | bick_sjs |
PHILIPS | 21PT5433/78R | The image began to shift to the right with a dark band in the horizontal direction and burned. the horizontal but11apx. made the change and the TV worked but within a few minutes the same track. | I replaced the but11apx and c2447 from 22mf x 250v to 4.7mf/250v | wagner | |
PHILIPS | 20PT228A | Totally inoperative | C2409 , c2561 | c@rlinhoselectro | |
PHILIPS | HTS-3365X/78R | Distortion in the subwoofer | Distortion in the digital audio stage. | Track recovery between pin 223 of ic209 and pin 13 of connector rb403 (tsd2) | mcgayver |
PHILIPS | 29PT4635/78 | On-screen video ring only in uhf | Add a 1k capacitor in parallel with the horizontal drive bc337 - q7461 - horizontal drive | Modification | GEMASI |
PHILIPS | 21PT5437/78 L03.1L AA | Alloy with closed vertical | 1r resistor position 9445 | So replace | This email address is being protected from spambots. You need JavaScript enabled to view it. |
PHILIPS | 20PT3331 L03.1 | Same Audio, Som Chega Ate R3903 | Dz 6908 tsound is no point in testing, you have to change it | Elias2305 |