PHILIPS TV Repair: Common Faults and Solutions.
Search: PHILIPS
Results: 14170
Results: 14170
PHILIPS Repair Guide: Common Issues and Fixes
Brand | Model | Fault | Detailed Problem | Solution | By |
---|---|---|---|---|---|
PHILIPS | 21PT4331 | TV without sound with volume at maximum hears the sound but it is very cracked | Capacitor 2861 shorted on pin 21 of ic an5891k | multsom | |
PHILIPS | 20PT4331 L03 1LAA | Attention guys. This TV came into my electronics today, with no sound, normal voltage of 13 volts on the output and half of the +b also normal on the pin that goes to the speakers, indicating that the output is working. | C2444 of 470/16 volts connected to the cathode of the diode d 6444 filament line. | Replace c2444 without testing. let's help everyone. | This email address is being protected from spambots. You need JavaScript enabled to view it. |
PHILIPS | 20PT529A | No audio | Speakers | Replace speakers | eletronicaapolo |
PHILIPS | 29PT4635/78 HC | Noise at the kinescope connector at the focus input and turning off | Change the connector and capacitor 2455 47mf/25v put 47/50 | carlosss | |
PHILIPS | 29PT5645/78 | Does not turn on or turn on stand-by | Leaky diode in the primary of the 6532 stand-by power supply. | Replace the bav21ws diode and ok. | toinho eletron |
PHILIPS | 20PT3131/78 | Reduced vertical at the top folded image | C2460 68k poliester | Replace | ze nunes |
PHILIPS | 29PT5642 L04 | Power supply does not weapon | 6v diode 2536 short | Replace component | CSOM |
PHILIPS | 20PT123A | Doesn't start | Fly back / ov2094/41 | Replace the fly | eletronicaapolo |
PHILIPS | AZ1575 | Doesn't start | Q7006/7007 bc337-25 | Replace items mentioned and check resistors 3022/3023/3024 and 3037 | eletronicaapolo |
PHILIPS | 14GL1316 | Osd does not come off the screen | Oxidized touch key tracks | Retrace the trails | eletronicaapolo |
PHILIPS | 21PT5435 | Turns on and after the plot appears (lights up the screen) the television turns off in approximately 10 seconds. | Replace the 6445 smd diode also replace the 2455 electrolytic 10ufx35v. | Replace the 6445 smd diode also replace the 2455 electrolytic 10μFx35v. | WAGGUINHO |
PHILIPS | 21PT9467C 78 SK 4.1 LCA | It turned on and the channel character appeared and when it turned off it went to STBI | Defect abl c303 open replacement | Problem solved | eletronica poleza |
PHILIPS | 29PT4635/78 | Does not turn on but the stand-by LED blinks | C2455(47uf/25v) | AELSON | |
PHILIPS | 25PT848A | No screen image with 0 volt | Shorted screen pin | In my case, I tapped the series lamp from the ground to the screen on the tube and the short came out | ANTONIO NOBREGA [PATOS.PB] |
PHILIPS | 14PT1686/01B L01.2E | Lights up and goes out after a few seconds | Transistor 7313 on the kinescope board shorted | jose almeida tavares | |
PHILIPS | FWC270 | No sound! When you remove the power cable from the socket, audio comes out in the boxes 8817 10/02/10 ] [60.00 | The defect was the MOSF 7302 =stp16ne06, I removed it and the sound started working normally again, I put one from the scrap IRFZ48N and it was great. | marcos melo . CASCAVEL CEARA | |
PHILIPS | 21PT5435 | No color | Replace epron 24c16wp | Nilton Neves | |
PHILIPS | 32PW 8608-12 | Just open the kinescope a little | I don't know, I wish you could give me a tip | luis cunha | |
PHILIPS | 29PT 4635 L01-1C | Burnt bu 4508 was replaced and didn't work | It was c2455 | luizsa | |
PHILIPS | FW C270 | No sound at 220v put normal sound at 110v | Def. fe 7302 p16ne06 ou equiv. irf822 | Help yourself leave your tip | ELETRONICA ARNI>L. LEAL-SC |