Search: PHILIPS
Results: 14170

PHILIPS Repair Guide: Common Issues and Fixes

Brand Model Fault Detailed Problem Solution By
PHILIPS14PT3131/78R
PT3131
Green screen, with retrace and disarmingResistor connected to transistor 7310 on the kinescope PCI (open/check)Replace of the samevinicius
PHILIPSFW-M912
Does not turn on, tries to turn on, it seems that the relay does not arm or the relay keeps vibratingFaulty relay t904BRUSKE
PHILIPS29PT4640/78
Vertical closed + or - 4 cm at the top and bottom with wavy lines from the middle to the top about 15 cm on the screenI replaced the c2252 1n that goes on pin 17 of the computer and it workedSidney Alves
PHILIPS29PT4635
Noise in the horizontal output stage sometimes turns offC2455 47/25vCapacitor replaced
PHILIPS20PT122A/78R
Image with horizontal pole bending imageTransistor 7440 bc 847Replace of the sameeletronica poleza
PHILIPS25PT5322/16
MD1.2E AA
Does not stop tuning, and the tuned channels have sound but with a distorted imageCoil 5114 (50131)Bobune is on plate 8211 015 0967 4JOAQUIM CUNHA
PHILIPSDVD3124
Don't readEngine does not turn1r resistor connected to pin 12 of the open driverp
PHILIPS20PT3331
TV with the top part of the vertical partially facade and with lines of retracesThe capacitor c2460, 83 or 83 nf, was replaced and the problem was resolvedAs a precaution, also replace capacitors c2446, c2465, c2463,heliomar
PHILIPS20PT534
Oscillating weakly with reduced frameI changed the eprom memory and the device worked normally againMemoria epromasr
PHILIPS14GL1313
Tsound is no image, it just chirps very softly 22k resistor chasis (3501)Change the res: from (22k)eletronica ceara
PHILIPS20GL1042T
Tsound is sound and no image when powering the esklim the screen turns green with a defect retraction line and the ci tda3565 chas:(ic260)Replace the sameeletronica ceara
PHILIPS14PT314A/78R
With drizzle and no image on pin 8 of the varicap tsound is 32v replace the varicapChange the varicap.eletronica ceara
PHILIPS20PT3331
Closed image on the top side about 3 fingers plus about 20 white lines below the black band downwards the normal image to solve the problem replace 2 capacitors chas: (2465) 10uf 160v or another chas: (2446) 470uf 16v ok? ??Replace the 2 capacitorseletronica ceara
PHILIPS14PT110A
L7L
It didn't turn on, it stayed on standby, when I pressed the channel button it flashed several times very quicklyTsound was a lack of 9v voltage coming from pin 5 of the fly, 1Ω resistor 3499 open and transistor 3480 bc337 shortedRomolo
PHILIPS20PT3331
I'm soundGood friends, this TV had no sound, normal image, change the capacitor c444, ok?MACIEL CEARA
PHILIPS14PT218
L01.2L
Stopped, inoperative. totally dead.Power supply. power supply regulator 7520 (tea1507) and photo coupler 7515 (tcet1103(g))After changing the regulator, the power supply worked, however, it had 130v at the +b of the fly back and would not start. Noting that the photo coupler seemed to be fine but, after replacing it, the TV worked normally.Tec Video
PHILIPS14PT100G
Vertical closedIn this case it was the 3412 (22k) open resistorfernandocamarques
PHILIPS21PT4428/16B
MD1.11E AB
Without image and sound, dark section and at the end of the lower limit a horizontal sectionFusivel 1463; d6463 (byv27-400)We don't have +29v verticallyjoaquim cunha
PHILIPS21PT6456
Reduced height, image folded at the topC2465. 10uf/160v.nunes
PHILIPS29PT8422
When the device is turned on, a narrow vertical strip appears and it immediately turns off.Sun from burning on the deflector connection terminals (horizontal).Resolder them.CLÁUDIO RIBEIRO,TECNOSAT ELETRÔNICA,JATAÍ-GO