PHILIPS TV Repair: Common Faults and Solutions.
Search: PHILIPS
Results: 14171
Results: 14171
PHILIPS Repair Guide: Common Issues and Fixes
| Brand | Model | Fault | Detailed Problem | Solution | By |
|---|---|---|---|---|---|
| PHILIPS | 14GL1314 | Takes time to call | C 2351 | ||
| PHILIPS | 20PT3336 | Normal power supplys TV turns on and the screen does not light up (kinescope with filament off) then goes into protection mode | Resistors 3343 and 3344 | WAGGUINHO | |
| PHILIPS | 20PT3336 | When switching on, flash the stand by LED and then disable the power supply (protect mode) | Transistor 7540 open/replace it | WAGGUINHO | |
| PHILIPS | 20PT3331 | Normal power supplys TV turns on and the screen does not light up (kinescope with filament off) then goes into protection mode | Resistors 3343 and 3344 | WAGGUINHO | |
| PHILIPS | 29PT4635/78 29PT4635/78 | The bu 808 keeps burning in the fountains | I don't know | marcos | |
| PHILIPS | 21PT8467 | With characters and one hundred luminance | R 3442 of 100k open on the abl line | This email address is being protected from spambots. You need JavaScript enabled to view it. | |
| PHILIPS | 29PT6566 L04.LAA | Black band on the left side (08 cm) (lack of width on the left side of the screen) | C-2486 | I replaced the c-2486 everything went back to normal | Rogermons This email address is being protected from spambots. You need JavaScript enabled to view it. |
| PHILIPS | 20PT3331 | The filament turns on and off 3 times and remains off | Q 7491 smd | Dj carlinhos | |
| PHILIPS | 21PT5433 | Low sound (very low) | Swap c2444 470/16v | Beto Eletronica | |
| PHILIPS | PT3336 L03.6L | Vertical stroke and turned off | R 3448 | juci | |
| PHILIPS | 20PT 3331/78 | No sound when turning on the TV after some time, the sound returns but is low. normal image. | Changed the c 2444 capacitor with low capacitance. This capacitor is close to the fly bak, for those who don't have the schematic. OK. | jaironuness | |
| PHILIPS | 29PT4641 | Does not turn on, and the stand-by LED does not light up | Change coupler photo | ||
| PHILIPS | 20PT4331 | Vertical beam | 7466,7464 7463, the 7464 was shorted but the protection did not activate, after replacing it went into protection due to the 7466 and 7463 | Dj carlinhos | |
| PHILIPS | 20PT4331/78R | Turns on the TV, horizontal RGB lines appear, vertical lines are slightly closed and then turns off. | Capacitor 2460 (663k 250v) | Edson Peixoto | |
| PHILIPS | 21PT5433/78R | Burning horizontal output - intermittent | Get straight to the point. Replace the deflector coil. case solved | Otecnico.20m.com | otecnico |
| TV PHILIPS | 20PT 120 A/ 78 R | TV doesn't turn on | 8444 leaky replacer. | jaironuness | |
| PHILIPS | 29PT4631 | Serrated or sawtooth image | Changed resistor close to bc's 337/327 | Replace r3493/ 5r8 | cesar_unitec |
| PHILIPS | 20PT326A/78R | When turned on, it generates high voltage, the filament lights up, but it does not shine or sound, emitting a noise similar to a cricket. | Ic 7600 | The replace of the same | nonato |
| PHILIPS | 20PT326A/78R | Turns off when turned on, remaining on standby | Resistor 3470 18k open vertical protection | Replace of the same | nonato |
| PHILIPS | 29PT4640 | When you turn it on, it turns off then, after insisting several times it works | Pre-horizontal filtering | Ronie Grein |